Dirty Operations, Again!!

[MelMfg]

We should also thank the person(s) who 'fixed it' as well as 'found it'.

[Colin Gilchrist]

+1 on thanking the gurus at CNC Software.

 

 

Colin Gilchrist

The Boeing Company

MR2 and Beta test site

[Jack Neelands™]

Thanks Chris!!!!!

[jeffl]

quote:

---

In V9 I used to make a seperate config files,

one using C:temp1 the other using C:|temp2

One session of V9 would use the Temp1 folder, the other Temp2. It took a lillte work to set it up.

seperate config files and desktop icons etc, but it worked. I never had trouble running 2 sessions of V9.

I haven't tried this in MR2, but I suspect a similar sceme would make a good workaround till X2 comes out.

---

Has anyone tried this workaround in X?... When I was at IMTS, they said that X2 would not be out until end of year.

[peon]

Our IT lady just set it up that way Jeff but I didn't have time to test it. She did the same for V9 and it worked in the past.

[peon]

Jeff. She did it! I have different config files using different temp files and now I can have multiple sessions open without any problems so far.

[jeffl]

Just set X up for 5 temp folders...

 

I have 5 config files labled temp1, temp2, ... Under each configuration set the temporary folder file location to the respective temp folder. For example, Temp1.config will be set to c:/temp1. Now I have 5 icons on my desktop to open with the appropriate config file: c:/mcamx/mastercam.exe temp1.config

 

Multisession without dirty ops!

[charleschia]

can someone teach me how to setup the config files for multisession of V9?

 

thanks