mori seiki

[Avarillas]

does anybody knows how to imput programs on the new fanuc controls of mori seiki nh-5000?

 

please Heeeeeellllllllpppppppppp!!!!!!!

[Guest]

how are you getting the program in? DNC?

 

prog list >> punch/read

[Keith @ Solid Code Solutions]

Or is it via the ethernet?

[Avarillas]

the machine has a flash card instead of a rs232 plug

[Guest]

I usually use

 

M198 P1234

 

This runs the program that is on the car, the P# being whatever the program number actually is.

[Keith @ Solid Code Solutions]

A PCIMA? If so, apperently that is one of the new options on a machine that is coming. I would think that it either would be an addition drive or would be a definable default DNC location.

[Guest]

Keith,

 

Most of the Fanuc i serires have the slot available, all of our Nv5000, 16i's have them and we use them.

 

Not new been available for several years

[Keith @ Solid Code Solutions]

John,

 

Excuse my ignorance but do you need to call the program on the card by editing a main in memory much the same as doing a remote call with Cimco or a schedule on an Okuma.

[Guest]

If the program is small enough to be stored in main memory you can transfer it into the nc memory and execute as normal, if not you can run it off of the card using the sub call. On the newer ones you can store the program in the 50 meg storage that comes with the base machine and run it out of there.

[Keith @ Solid Code Solutions]

I was talking to on of the applications from the sales company today and we talked more along the lines of the ethernet connection and how to call and buffer. We don't store anything on our controls anymore. Either the files are way to large even for todays control memory or the programs are dissposable and would just need to be ran the once.

[Avarillas]

I just need to know how do I read a program from the flash card, the guy that used to run the machine quit.

[TheePres]

Avarilla,

Not sure on exact setting..since its been awhile. But in settings, we set Device=1 for Rs232 and Device=4 for mem card.

[Guest CNC Apps Guy 1]

Yes, channel 4. But I'm pretty sure it's already set for that. He just needs to know the key strokes to get the pogram into the control I'm guessing. I don;t remember off hand, that damn CRAPPS interface...

[MLAM]

WE USED CIMCOEDIT FROM MASTERCAM TO INPUT PROGRAMS ON THE MORI SEIKI NV5000, SV500, SV503, SH630, AND SH633 M/C.

[Kyle Waters]

We don't have the latest MAPPS control, but ours is: edit>prog. list>read>(highlight the desired file)exec. By highlight I mean you only need to scroll to the correct file name.

[Rick Henrickson The Boeing Co.]

on the nv5000

press the setting button

type 64

press input

highlight card (with the arrows)

press set

type y

press execute

 

that will set it to see the card

then just copy over as normal

[Ocean Lacky™]

Not in the shop so doing this from memory...On our Fanuc 18iMB...

 

to load to machine memory from a flash card:

 

Selector switch to "EDIT"

Press "SYSTEM" button under keypad

Press rightmost softkey under screen untill you see "ALL IO"

Press "ALL IO"

Press"OPRT"

Press "F READ"

Enter Program number on Keypad

Press "F SET"

Press "EXEC"

Press "PROGRAM" - Under keypad

Selector Switch to "Auto"

Cycle Start to Run................

 

To Delete a Program from machine memory:

 

 

Selector Switch to "EDIT"

Press "PROGRAM"

Enter Program Number to Delete (example O0001)

Press "DELETE"

 

i THINK this it how it works...i'll check in the morning and correct if necessary.

 

HTH

[ali.can]

i have load program on near screen card slot

if i take program another machine i can load nv5000

but if i write on pc i dont input program

i have problem but what i dont know