Rotarty Post editing X MR2

[Rob B]

I need help editing my post. The post that my reseller has sent me does not have the option to take the machine home on rotarty index. The post that I was issuing for v9 was updated but doesn't post all my operations. This is why I am needing to use the new post from reseller. I would contact reseller(CadCam Solutions) but they are all at a MC conference this week. That leaves me with no help till Monday.

If someone can either tell me how to get my old post to post out all operations or add some code into the post that was supplied via reseller, so machine goes home before each rotatry move.

HHHHHEEEEELLLLPPPP ME Please!!!!!!!!

[Todd Tracey from Fastech]

If you are not getting all operations posted, check the names of the ops in the operations manager. They must all be the same to post together. Select all, righ click in the ops manager and edit selected operations, change NC file name

[Rob B]

Thanks Todd, I didn't have all the file names the same. I just thought I knew a little about MC. X has proven me wrong again.

Rob

[Greg Williams]

This is the one if you want to play with the post.

 

I have used MR10 and forced to minimum 300mm

 

ppos_cax_lin #Position the rotary axis before move - rapid

if index, pindex

else,

[

if fmtrnd(prv_cabs) <> fmtrnd(cabs) & rot_on_x,

[

sav_gcode = gcode

gcode = zero

if mr10>300, n, "G0", *mr10, e

else, pbld, n, "G0Z300.", e

if prv_mi8 = one, "G05P0(SGI OFF)", e

pbld, n, "M11 (UNLOCK)", e

pbld, n, sgcode, pcout, e

pbld, n, "M10 (LOCK)", e

if mi8 = one, "G05P10000(SGI ON)", e

!cia

ps_cinc_calc

gcode = sav_gcode

!mi8

]

]