Fagor configuration..

[RDot604]

Anybody that uses a xxxxor...I jus did a fresh install on a new computer and i have a posting program called WinDNC. I dont know how to set it up...Anybody with the same program or a better one, Please let me know....Thanks

[Bruce Kanzelmeyer]

Years ago I used xxxxor Controls on MotionMaster Routers and WinDNC is a communication program that uploads and downloads files to the controller through a serial port--lets you drip feed large programs as well. Its not a post processor. As I recall its a pretty straightforward setup--just make sure all your cables and connections are good and setup correct baudrate on controller, etc..

[Ying Jiang]

xxxxor doesn't use standard RS-232 cable pin out. Check with your manual or dealer for details.

[jrykrl]

What model are you using?

8040?

I am familiar with the control, I had 2 of em.

I had to do some wiring changes for the rs 232

My best friend was their application eng., so if I don't know, he will fer sure

Jer

[Tom Dorgan from American Precision]

RDOT

I can hook you up with cable pin outs if you need them. What control is it? What machine? I have setup many WinDNC setups as our routers used to have xxxxor controls prior to switching to Fanucs.

[Guest CNC Apps Guy 1]

(post taken from duplicate topic)

 

Written by Tommy Dorgan from Standard Router

 

quote:

---

What control are you using? Unless you have the ethernet option you pretty much have to use the WinDNC software to communicate with the machine.

---