zero operations selected

[Camdude®]

here's one for ya!

i select all operations for regeneration. i select the regen button and i get an error message that states.

"Zero operations selected."

it is unselecting the operations after i select them.

anybody else dealing with little bugaboo.

[Guest]

you don't have the lock on do you?

[Guest]

Did you change the toolpath group name?

 

If you do you must select, using ctrl or shift them all and then regen

[Camdude®]

nope to all above, it's the weirdest thing, i select a toolapth to regen then the system deselects the toolpath and i get the warning.

[3R!< W3NG3R]

I have had problems like yours. Sometimes the ops manager just doesn't work right at all for me. The only workaround I have found is to save and restart MC.

[Colin Gilchrist]

RAM Saver...

 

Will cure your headache without having to restart MC.

[P_Scott]

Camdude,

 

Are you using X or X2? If so you may be selecting the wrong regen icon. There are two icons for regenerating toolpaths in the Ops Mgr. The one on the left, it looks like a ball end mill with a little green triangle pointing to the right, will regenerate all selected operations, whether they need it or not. The other one, looks like the same tool only with a little red "x" to the right of the tool, will regenerate all ops that have a red "X" over the toolpath icon. The second icon, will give you this "error" message if you click on it and there are no operations that are in need of regeneration. Then you need to select the operations all over again. Is this what is happening? HTH