Axis and spindle warm up macro

[#Rekd™]

Hi,

 

Here is a good axis and spindle warm up macro.

 

%

O0003(WARMUP MACRO)

(FEEDRATES + COUNTER)

#619=60.(REPETITION COUNT)

#615=400.(FEED PER MINUTE)

#616=1000.

()

N10G53Z0G49G80G90G0M5G69

#618=0

#5201=0(X EXT OFFSET)

#5202=0(Y EXT OFFSET)

#5203=0(Z EXT OFFSET)

#5321=0(G59 X)

#5322=0(G59 Y)

#5323=0(G59 Z)

N10G53Z0G49G80G90G0M5G69

G59

M6T25

(M8)

M3S#616

N11

G4

IF[#618LT[#619*.33]]GOTO20

#616=2000

IF[#618LT[#619*.66]]GOTO20

#616=3000

N20S#616M3

X-30.Y-16.F#615(Y- LIMIT)

Z-8.G1F#615(Z LIMIT -8)

Z0(Z LIMIT)

X0Y0.(X LIMIT)

#618=#618+1.

IF[#618LT#619]GOTO11

G53Z0G49G80G90G0M05

G53X0.Y0.

G200

M30

%

 

John Ford

[Cannon]

Just started to learn this macro stuff.. Would this work on a machine with fanuc 0m control that only has macro A?

[#Rekd™]

Hi Cannon,

 

I am using it on a Fanuc OMi, not to sure about yours.

 

John

[JG]

No, but you could covert it to macro A....

much more cryptic though.

 

Jg