Wild Boar Vector file?

[Longbow]

Ive downloaded a couple of rastor to vector programs to convert pictures to geo. but I havent been able to get a good quality. I need a Wild Boar to engrave on a knife I have made. Its all I like before heat treat. Does anyone have one or could lead me to a good rastor to vector software that works well and it fairly easy to use and not too expensive.

[Midwest]

can you put the picture file on the FTP?????

 

 

Also.............what ver of Mastercam????

[Longbow]

Yes I can put it there.. I have version 9. Ill put it in the all pictures file under boarpic1 and 2. Which software do you use? I have request for engraving such pictures often and would like to be able to do my own also.

 

[ 03-23-2007, 11:05 AM: Message edited by: Longbow ]

[Longbow]

I put them in the All Pictures file on the FTP site. Names borepic1 and borepic2. Ill put my knife on the ftp site also if anyone is interested. Its really cool and pretty big. I 3Ded it out of D2.

[Midwest]

Didn't tranlate very well.

 

 

You have mail

 

 

sent you a ver 9 file

[Midwest]

quote:

---

Ill put my knife on the ftp site also if anyone is interested. Its really cool and pretty big. I 3Ded it out of D2.

---

Where did you put and what is the name?????

 

 

I made one a while back, used a deer antler for the handle.

[Kannon]

I will look for one for you on Monday

[pip]

Same question as above, where? and under what name?

I use coreltrace to convert..

[Kannon]

as promised..dxf format..

check your mail..

[Longbow]

Thanks for the replies... I hadnt put the knife on the FTP yet... Ill put it there today. Do you want just the solid or program and all? The program is sort of choppy from doing one part at a time as well as haveing to move clamps as I machined around it.

[Longbow]

I put the entire program up. Its in the MC9 file

ftp://mastercam:[email protected]/Ma..._files/LONGBOWS KNIFE.MC9

 

There are a good many surfaces and solid sheets there that I used to trim out the hollow grind and for tool paths. The solid is very clean. Just be careful if you delete anything it could distroy the solid.. its not in a really good order in the levels. I did it all on the fly.