Another OKUMA mill post question

[jeff]

Mcam v9

Mposp7 post.

 

I want the post to output G15Hxx after the next N line.

Right now it's before the N line.

The very first G15 is good, I'm just having a problem when the same tool does a different operation.

Currently using mr1 to change G15 values.

 

Thanks.

[crazy^millman]

If the post is using a null tool change part of the post look there. You can also add a condition statement to the post that would handle this. Look to Mpmaster it has great examples of how to handle this.

 

HTH

[jeff]

is the null tool change ptlchg0???

[jeff]

I put ("G15", h ) in the ptlchg0 and that is inserting it before the N line.

How do I make it after?

[jeff]

ok I got it to output after the N line, but how do I tell it to do write it only if it changes?

[jeff]

I have a prapid move that I need removed.

It's before each of my G15 #'s:

 

G56H01X-.5178Y0.Z2.S2444M03 psof

G00Z.25 pzrapid

G01Z.1F20. plin

G02X.5178Z0.I.5178J0.F20.53 pcir

G02X-.5178Z-.1I-.5178J0. pcir

G02X.4576Y.2423Z-.1845I.5178J0. pcir

G02X-.5178Y0.I-.4576J-.2423 pcir

G02X.4956Y.1499I.5178J0. pcir

G03X.533Y.1299I.0287J.0087 pcir

G01X.5617Y.1386 plin

G00Z.4 pzrapid

X.7322Y0. prapid<-HERE

G15H02 ptlchg0

G56H01X.7322Y0.Z.25S2444M03 ptlchg0

G01Z.1F20. plin

G02X1.7678Z0.I.5178J0.F20.53 pcir

G02X.7322Z-.1I-.5178J0. pcir

G02X1.7076Y.2423Z-.1845I.5178J0. pcir

G02X.7322Y0.I-.4576J-.2423 pcir

G02X1.7456Y.1499I.5178J0. pcir

G03X1.783Y.1299I.0287J.0087 pcir

G01X1.8117Y.1386 plin

G00Z.4 pzrapid

X1.9822Y0. prapid

[Randy Morton @ Clem Industrial]

Kinda looking like you are talking to yourself here, Jeff.... are you only using v9? I have a good post that is an X post that I could reference for you, but I don't know much about v9 post differences....

 

But the Okuma post I have is very sound. After posting, I never edited a thing....so if you need some info, and you figure it's close enough, just let me know what it is and I'll have a look at my post.

[jeff]

yes V9.

I'm leaving work right now, and I'll try to check in on Monday.

Thx!