Issues with verify in X2 MR1

[David Perron]

Every time I hit the verify button and choose my solid as for the stock. The resolution of the solid is wrong. Arcs will be composed of line segments small slots will be missing. It simply is not correct. Has anyone else noticed this?

I have set the quality to high, with no result.

 

It worked just fine before I installed MR1

 

my system has

Windows XP sp2 XEON CPU 2.4 GHz/2.4 GHz - 2.GB RAM

NVIDIA QUADRO 4 XGL - 128 MB

[wfcPain]

Use SP1 for verify.

MR1 verify is broke,but a fix is in the works.

A search on this subject will give you the details.

[David Perron]

Next time I will not load a new MR untill I have checke out the issues on this site. Thank you for the confirmation, I was hoping it wasn't my graphics card.

[mrmead]

quote:

---

MR1 verify is broke,but a fix is in the works

---

Is this from CNC ,Did they make this statemant somewere, one of the guys here is wondering if he should wait for the fix or go back.

[Dan@home]

I am kind of surprised they would even release this MR.

 

Dan.

[Guest]

Guys,

 

This release is really relatively bug free and stable, especially when compared to say the first X release. Unfortunately, the big glaring bug is something that is NOT trivial.

 

SP1 was released and it allows MR1 files to be brought back into SP1 with losing anything. That is currently the work around.

 

There is a fix in the works, the timing of it is currently unknown, it IS being worked.

[Leif Johnson from MICO Inc]

Too bad I didn't do a side by side install. I usually do, but decided to do a overwrite instead. I had so many other versions that my MIS department was getting upset. I would almost rather tell my coworkers that features don't work than to have them try to remember what version can do what.

[Mike-T]

My workaround, use sp1 to setup the solid stock and verify 1st tool, then save stl. Open Mr1, set verify to file and use that stl. So far its worked everytime for me.

[Dazz]

Use the stlheal chook it does work, resave the stl then in the dialogue that comes up check the use as is option.