Hey Mick your PC sounds awesome with a description like that!!

As above on X7 install.

Crashed on start up, on two machines today, working fine on both machines on friday !!! .CFP was disabled on install.

In your post processor you will find a line that looks like this: minfeedpm_m = 999999 place a"#" in front so pp outputs your feed, to look like: #minfeedpm_m = 999999. see how you get on. --------------------------- Mastercam X2 MR2 sp1 Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram

I suppose i should have done a search first, and have gone to my reseller, but does anyone now where i can get a mastercam cry towel, ive been using a dirty rag, its not very sanitary, can anyone steer me in the right direction. --------------------------- Mastercam X2 MR2 sp1 Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram

If you minimize and maximise mc, you can get around it that way.

Guys, Possible bug, contour tool path using a reference pt with the filter gives crazy rapid movements, toggle filter off and tool path returns to normal? I could not find this topic in search. Any ideas how to fix this? this problem does not happen 100% of the time. --------------------------- Mastercam X2 MR2 sp1 Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram

Cool!!!, i wasn't sure when or how to apply that feature,

I ended up assigning through local toolpath parameters (planes).

Hey guys, for some reason the wcs numbers are not being assigned to all ops. I have four positions so four numbers to be assinged on about 70ops but the odd op is being left out, i cant see any pattern to it. Assigning through view manager of course. --------------------------- Mastercam X2 MR2 sp1 Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram

is the square to be an upstand or a cutout???

"G", do you run your ops manager on other screen wilst running multiple apps???

Are you running Mr2, duel screens, and multiple applications, multiple apps on duel are not supported, corrupts config files. Results in unstable system. --------------------------- Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram

What Mick said!!!!

Apparently mc on dual screens is not designed for multiple apps.....says QC @ mastercam --------------------------- Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram