Dazz
-
Posts
50 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Dazz
-
Hey Mick your PC sounds awesome with a description like that!!
-
As above on X7 install.
-
Crashed on start up, on two machines today, working fine on both machines on friday !!! .CFP was disabled on install.
-
In your post processor you will find a line that looks like this: minfeedpm_m = 999999 place a"#" in front so pp outputs your feed, to look like: #minfeedpm_m = 999999. see how you get on. --------------------------- Mastercam X2 MR2 sp1 Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram
-
I suppose i should have done a search first, and have gone to my reseller, but does anyone now where i can get a mastercam cry towel, ive been using a dirty rag, its not very sanitary, can anyone steer me in the right direction. --------------------------- Mastercam X2 MR2 sp1 Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram
-
Loss of OM Control - Start Point- Move Dynamic?
Dazz replied to J Coulston's topic in Industrial Forum
If you minimize and maximise mc, you can get around it that way. -
Guys, Possible bug, contour tool path using a reference pt with the filter gives crazy rapid movements, toggle filter off and tool path returns to normal? I could not find this topic in search. Any ideas how to fix this? this problem does not happen 100% of the time. --------------------------- Mastercam X2 MR2 sp1 Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram
-
Cool!!!, i wasn't sure when or how to apply that feature,
-
I ended up assigning through local toolpath parameters (planes).
-
Hey guys, for some reason the wcs numbers are not being assigned to all ops. I have four positions so four numbers to be assinged on about 70ops but the odd op is being left out, i cant see any pattern to it. Assigning through view manager of course. --------------------------- Mastercam X2 MR2 sp1 Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram
-
is the square to be an upstand or a cutout???
-
"G", do you run your ops manager on other screen wilst running multiple apps???
-
Are you running Mr2, duel screens, and multiple applications, multiple apps on duel are not supported, corrupts config files. Results in unstable system. --------------------------- Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram
-
What Mick said!!!!
-
Active window changing with dual monitors
Dazz replied to Jacob Featherstone's topic in Industrial Forum
Apparently mc on dual screens is not designed for multiple apps.....says QC @ mastercam --------------------------- Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram -
Hey Mike, are cwf looking to sell an old one!!
-
Verify rendering for me in mr2 is nearly non usable, selecting and deselecting ops using surface geo lags forever. Using Mr1 sp1 --------------------------- Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram
-
Yes it is config files, i found i had to uninstall mr2 becouse it was to unstable especialy using duel screens and multiple apps. --------------------------- Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis
-
Mike, They are guinea pigs on the new borer, and new borer equals new problems twecks and changes blah blah blah etc and so forth.!!!!
-
quote: I've had this problem on a couple of computers now. I'm beginning to believe it's not a good idea to do side by side installs. You'll need a plan B, version!!
-
gcode, the config versions are being written to their appropriate files.MR2 to MR2 config etc.
-
I have had constant corrupted config folder, and kept a seperate folder for backup and replacment.Becouse of x2mr2 instability i have gone back to mr1sp1 --------------------------- Mastercam X Mill Level 3 Mastercam X Lathe Level 1 Mastercam X Solids Mastercam X FiveAxis XP Pro SP2 AMD Athlon64 X2 Dual 5600+ 2.81GHz,2.0G Ram
-
Still getting the same error "unhandled exception error" but it will restart. In your house yet Mick???
-
Thanks Mick for your answer, but it apairs the config files were corrupt,i now have a back up file, system working again.
-
I cant even get to start now.