coolant stops when taping

[malibu]

please help

 

mx2 mr1

 

coolant stops when taping (but works fine when the taping op is the only one send to machine)

any ideas?

 

thanks all

[?Mark]

what does your

ptlchg$ #Tool change

look like?

[DavidB]

Whats the differance in the code when you post only the tap op and when you post the tap op with other ops?

[malibu]

Sorry for late reply. I had to take days off.

(tapping only file)

%

N1 O0001 ( TOP PART )

N2 ( CREATED ON 04-27-07 AT 8:40 AM )

N3 ( MCX FILE - PLATEDTOP PICE.MCX )

N4 ( NC FILE - C:MCAMX2-MR1MILLNCTOP PART.NC )

N5 ( MATERIAL - ALUMINUM INCH - 6061 )

N6 G20

N7 G0 G17 G40 G49 G80 G90 H0 E0 Z0

N8 ( NO. 2-56 TAPRH TOOL - 6 DIA. OFF. - 6 LEN. - 6 DIA - 0.086 )

N9 ( FADAL - 4 - AXIS VMC )

N10 ( FADAL - 4 - AXIS VMC-1 )

N11 M8

N12 T6 M6

N13 A-0.

N14 G0 G90 S1000.2 M5 M90 E1 X-1.736 Y-.095

N15 G84.2

N16 H6 Z.7

N17 G84.1 G99 X-1.736 Y-.095 Z-.2 R0.7 F1000. Q.0179

N18 Y.095

N19 G80

N20 M9

N21 M5

N22 G90 H0 Z0.

N23 E0 X0 Y0

N24 M2

 

(drill and tapping)

%

N1 O0001 ( TOP PART )

N2 ( CREATED ON 04-27-07 AT 8:49 AM )

N3 ( MCX FILE - C:HRL JOBSGUINNBRIJOTNOT PLATEDTOP PICE.MCX )

N4 ( NC FILE - C:MCAMX2-MR1MILLNCTOP PART.NC )

N5 ( MATERIAL - ALUMINUM INCH - 6061 )

N6 G20

N7 G0 G17 G40 G49 G80 G90 H0 E0 Z0

N8 ( NO. 47 DRILL TOOL - 5 DIA. OFF. - 5 LEN. - 5 DIA - 0.0785 )

N9 ( FADAL - 4 - AXIS VMC )

N10 ( FADAL - 4 - AXIS VMC-1 )

N11 M8

N12 T5 M6

N13 A-0.

N14 G0 G90 S8500 M3 E1 X-1.736 Y-.095

N15 H5 Z.5

N16 G83 G98 X-1.736 Y-.095 Z-.215 R0.015 Q.025 F8.01

N17 Y.095

N18 G80

N19 M9

N20 M8

N21 M5

N22 G90 H0 Z0.

N23 M1

N24 ( NO. 2-56 TAPRH TOOL - 6 DIA. OFF. - 6 LEN. - 6 DIA - 0.086 )

N25 ( FADAL - 4 - AXIS VMC )

N26 ( FADAL - 4 - AXIS VMC-1 )

N27 T6 M6

N28 G0 G90 S1000.2 M5 M90 E1 X-1.736 Y-.095

N29 G84.2

N30 H6 Z.7

N31 G84.1 G99 X-1.736 Y-.095 Z-.2 R0.7 F1000. Q.0179

N32 Y.095

N33 G80

N34 M9

N35 M5

N36 G90 H0 Z0.

N37 E0 X0 Y0

N38 M2

[doyleg]

your 2nd m8 is coming out before the m1. if running optional stop on this will turn off your coolant. there is no m8 after tool change. your m8's should be after your tool change.

[beej]

quote:

---

there is no m8 after tool change. your m8's should be after your tool change.

---

which could mean that your coolant setting is being turned on in the header rather than on the canned cycle.

[malibu]

where can I change this settings?

[?Mark]

Most likely you've got to move few things around.

Send me your post and I'll look at it.

Can't promise it today, but should have it by monday at the latest...

[malibu]

ok thanks

[Ocean Lacky™]

just curious.....are you using X style coolant? If so, is your coolant set to AFTER?

[malibu]

ocean,

where is this setting?

[Ocean Lacky™]

in your operations manager, select the parameters for your toolpath. look for Coolant. there should be two columns, one to turn it on or off, and one to choose "Before" "With" of "After"

[?Mark]

xgioser,

I didn't get any file from you over the weekend. Do you still want me to take a look at it?

[?Mark]

O'k looks like it's not your post but your settings.

Make sure they're setup like that in toolpath parameter page:

I'm talking about the Flood---On---After.

 

Sorry about the size...

 

[ 04-30-2007, 04:04 PM: Message edited by: Mark Banaszak @ JMQM ]