waterfall problem !!____again :(

[Goldorak]

quote:

---

This Service Pack contains a number of updates and bug fixes including:

 

* Verify "waterfall" problems.

---

dont work when i make a .stl file from a sphere surface

 

 

 

i got this!!!!

 

 

but the solid in stock set set-up is ok

 

 

i use X2_MR1_SP1 level 1

[gcode]

Check System/Config/Files

and make sure the path to the

Chook and the Apps folder point

to your MR1_SP1 installation

and not an older one. I've gotten into

all kinds of trouble by dropping

a config file from an older install into a

newer version.

[Rick Henrickson 65]

+1 gcode

check all paths

[Goldorak]

tanks gcode,

 

i change all my folders

i remake a new .stl file

but i still had a waterfall in verify

 

this one is perfect (no sphere)

 

[Goldorak]

so i dont tink is a configuration problem!!

 

maybe is due to the fact that i dont have sloids!!

[Roger Peterson]

Have you tried picking the solid for your verify stock, instead of the stl file?

[Goldorak]

i dont have solids yet!!

i use surfaces and i save it in .stl

then i use it for my stock setup

 

generaly it works great

[Goldorak]

quote:

---

Try running the STLHeal.dll Chook on the STL file before you run it in Verify. Many times this will fix the problems with the STL.

---

tanks Colin

 

now it works !!!!