Newb question #1

[Demon440]

The first part and I'm stuck! The part came in with the Y axis where I want the Z to be. Could someone please give me a hint on how to set it? Thanks

 

Bruce

[Guest]

You can either xform rotate or create a new wcs at your current position to make it orient properly

 

This answer arrived for the Chicago/Midway airport, enroute to Phoenix

[Steve Zirtzman]

John,

Are you on your Pocket PC?

[mcpgmr]

John, Did you ever consider doing help desk support from a foriegn country? You got the name now just work on the accent and you'll be all set!

 

But seriously, Your a hell of a guy to be helping out from the airport during a stop over.

[htm01]

quote:

---

This answer arrived for the Chicago/Midway airport, enroute to Phoenix

---

that's just wrong!!

go on vacation man.

turn it off and step away from the laptop.

enjoy

[Michael Sullivan]

X-form Rotate from side plane 90 degrees

[3R!< W3NG3R]

what about translate 3D?

[Demon440]

thanks so much guys. I changed the WCS and that seems to be working okay.

[Guest CNC Apps Guy 1]

That IS just wrong!

 

I'd do the same thing too.

[Randy Morton @ Clem Industrial]

The test of a true addict, put him (or her) on holidays and see if they still write in to the forum.... (Post xxxxe and James...)

[Guest CNC Apps Guy 1]

I'd pass (or fail depending on who you ask) that test... I have not had a real vacation in some time, I'm overdue and I think that I would just relax and fuggeddabout anything work related.