MpMaster HMC question

[gcode]

I'm using the newest mpmaster, set up for a horizontal mill.

 

I'm doing all my work in the front tool plane.

and need to force the unlock/lock and B output.

If I do some rotaty stuff everything is fine,

but if I just stay in Front, B0 will not post.

 

any idea how I can force the B0 output

[iowajim62]

Tom,

copy the front plane and rename B0 P1 or something and try using the copy and post that.

lookin for that other thread about this, I'll post if i find it.

[iowajim62]

M10,M11 Thread

heres that thread HTH

[Justin Beebe at Folsom Tool]

Gcode,

 

I had a similar problem with the mpmaster vertical post. Read the second paragraph in this thread. I did what Dave Thomson suggested and now I always get an M11 A0 and an M10 even if working in the top plane. I assume the advice should work for a horizontal as well.

 

link

 

Justin

[gcode]

Justin,

 

the newest mpmaster is a little different, but

I was able to get it working. Thanks for the link.

I posted the difference on the original thread

[Justin Beebe at Folsom Tool]

Glad to hear you have it working.

[Justin Beebe at Folsom Tool]

Thanks for sharing the differences.

[gcode]

check the other thread..

gcode was suffering from ACI yesterday