through tool coolant

[KCollins]

Does any one know of any companies that produce apaters for through tool coolant, ie...not through the spindle but mounted to it. We'd like to retrofit an andapter on an older machine for a new small run production job, only i can't seem to find any companies that make one.

 

thanks in advance for the help

[TR Mfg.]

Sandvik use to make something for this.

[?Mark]

If it's bt-40 than you're in luck here

[mike_f]

I seem to remember a company called Whalley ? George Whalley co., ? something like that, I'm not sure of the spelling that made coolant induced tool holders. if that's what your looking for. HTH

[Steve_at_custom]

If you look at the Seco website e-catalog and type in "rotary coolant", Seco-EPB Graflex holders will come up on the search results. I believe they will give you what you need. We have a system from Seco but a month after we got all set up for the job, we purchased a machine with through coolant, never used the tool from seco ever... So i can tell you where to look, but cant tell you how it performs.

[Columbo™]

We have some older Kennametal ones. Still use them on our older equiptment.

 

[KCollins]

i found some at bigkaiser.com

 

thanks for everyones help