Post help on Manual Entry

[RObert TImby]

Good Morning,

 

Quick question for the post experts, On my 5x Haas post, when I post manuel entry as code it give me that code, but on my 3x Haas post i get the man readable even though i put the manual entry as code. Were do i find the toggle in the 3x post so i can post as code?

 

Thanks

&

Happy Hoiday

[Michael Sullivan]

Hello Robert,

This is from a 3X Haas post

In your post check this section and compare it to mine.

 

 

pcomment2 #Output Comment from manual entry

scomm$ = ucase (scomm$)

if gcode$ = 1005, sopen_prn, scomm$, sclose_prn, e$ #Manual entry - as comment

if gcode$ = 1006, scomm$, e$ #Manual entry - as code

if gcode$ = 1007, sopen_prn, scomm$, sclose_prn #Manual entry - as comment with move NO e$

if gcode$ = 1026, scomm$ #Manual entry - as code with move NO e$

if gcode$ = 1008, sopen_prn, scomm$, sclose_prn, e$ #Operation comment

if gcode$ = 1051, sopen_prn, scomm$, sclose_prn, e$ #Machine name

if gcode$ = 1052, sopen_prn, scomm$, sclose_prn, e$ #Group comment

if gcode$ = 1053, sopen_prn, scomm$, sclose_prn, e$ #Group name

if gcode$ = 1054, sopen_prn, scomm$, sclose_prn, e$ #File Descriptor

 

 

Happy Holidays 2 U too!

 

-Mike

[RObert TImby]

Mike,

 

This is what my 3x post has in it

 

pcomment$ #Comment from manual entry (must call pcomment2 if booleans)

pcomment2

 

pcomment2 #Comment from manual entry

scomm$ = ucase (scomm$)

if gcode$ = 1007, "(", scomm$, ")"

else, "(", scomm$, ")", e$

 

I looked at my 5x post and it looks alot like you posted. I tried to paste and copy what i have in the 5x to the 3x but when i do that the tool comments start of okay but half way through the comments they go to the next line without a man readable ending that line and the next line starting the man readable.

[Michael Sullivan]

Robert,

Always Backup you post before you edit.

From my other HAAS post.....

Edit or Copy/paste so it to looks like this:

 

pcomment$ #Comment from manual entry (must call pcomment2 if booleans)

pcomment2

 

pcomment2 #Comment from manual entry

scomm$ = ucase (scomm$)

if gcode$ = 1006, scomm$, E$

else, "(", scomm$, ")", e$

[RObert TImby]

Thanks Mike

 

I'll try it out right now.

[crazy^millman]

Well just by looking at that I know you have a post that was updated and not a current X post. I would look at the HAAS 4 axis post and adjust it. This is from the X2MR2 post:

 

code:

---

pcomment2       #Output Comment from manual entry

scomm$ = ucase (scomm$)

if gcode$ = 1005, sopen_prn, scomm$, sclose_prn, e$ #Manual entry - as comment

if gcode$ = 1006, scomm$, e$ #Manual entry - as code

if gcode$ = 1007, sopen_prn, scomm$, sclose_prn #Manual entry - as comment with move NO e$

if gcode$ = 1026, scomm$ #Manual entry - as code with move NO e$

if gcode$ = 1008, sopen_prn, scomm$, sclose_prn, e$ #Operation comment

if gcode$ = 1051, sopen_prn, scomm$, sclose_prn, e$ #Machine name

if gcode$ = 1052, sopen_prn, scomm$, sclose_prn, e$ #Group comment

if gcode$ = 1053, sopen_prn, scomm$, sclose_prn, e$ #Group name

if gcode$ = 1054, sopen_prn, scomm$, sclose_prn, e$ #File Descriptor

---

HTH

[RObert TImby]

Thanks for the help I will try that too.

 

Guys have a great Holiday and stay safe.

[Colin Gilchrist]

NCI Gcode 1006 is "ouput As Code" from the manual entry toolpath. Michael was correct in his post. You just need to change 1007 to 1006 in your post processor file.