Post Processor For Robofil 2050

[Rickylim84]

Hi everyone,

 

Does anyone have idea on how and where to obtain the post for it? Charmilles Robofil 2050 that need 4 files to run the machine...

[Guest]

Contact your reseller, there is one available

[crazy^millman]

Your Dealer. This is your best resource to get posts. Welcome to the forum and like the way you asked that question.

 

HTH

[Jerry_P]

Contact your reseller for the post.

 

As far as the 4 files goes the .tec and the .wir files, the post will not generate them you need to do that at the machine. What the post will generate is an .iso file that has the tool path. As far as the .iso file that Charmilles calls the command file. I just use Wire Manual Entry and put all those commands in front of the tool path so when I post, it generates one .iso file that has the command file and the tool path file combined so all I need is three files.