colors wont stay

[1 master]

i update to the latest and greatest. after that i start to have problems. when i change my system color it stays the same for a little bit. after a while everything on the screen goes to green. if i change the attributes it works but then again after a while it goes to green. ive done a reboot, regen, redraw. nothing. can you guys help me out? thanks

[Pete Rimkus from CNC Software Inc.]

If you want it to stay at a certain value, you might want to change it in your Config file - look under 'Colors' and look for 'Geometry color' in the list of colors.

[1 master]

ok i did that and its still shows up green. why doesnt it match the system color thats in the box at the bottom?

[gcode]

open your config file in a text editor

and make sure all the file paths lead back to

your NEW installation folder

[litnin]

Try looking at your Groups (bottom R/H corner) delete anything thats in there. This worked for me.

[1 master]

open your config file in a text editor

and make sure all the file paths lead back to

your NEW installation folder

 

looks good

 

 

Try looking at your Groups (bottom R/H corner) delete anything thats in there. This worked for me.

 

did this and still no fix

i did a repair but it did no good.

[1 master]

I fixed it.