Level Manager Problem?

[Midwest]

Anyone been having trouble with the "Level Set" remembering what you type into it?????

 

 

If I type in the lower left box it doesn't remember what you type.

 

 

If you double click in the "Level Set" box in the level you want it remembers what you type.

 

 

I have never had a problem with this until X2 MR2 SP1

 

 

 

 

I have done a search and found nothing so far on this.

[Midwest]

[crazy^millman]

Make sure there is not a space on some of those level sets. I have chased my tail a couple times fighting spaces.

 

HTH

[Midwest]

Ron spaces can be a problem i agree.

 

 

My problem is I type in a message and hit enter on the key board it shows up in the layer Level Set box.

 

Then shut off the Level Manager and turn it back on and what you typed in is not there anymore.

 

 

The only way I can get it to stick is double click in the Level set box on the layer you want.

 

It used to work in both places B4.

 

Hope this makes sence.

[Midwest]

Type in Level "Number:"

 

hit the Tab key

 

 

Type in the "Name:" for the level

 

hit the Tab key

 

Type in the "Level Set:"

 

hit the Enter Key

 

Everything looks fine

 

Then

 

shut off your Level Manager

 

Then

 

Turn back on and everything is there, but the "Level Set:" info

 

 

I have tried this on 2 different seats here they both repeat the same error.

[Midwest]

quote:

---

I have tried this on 2 different seats here they both repeat the same error.

---

Make that 3 seats.......

[Nils N]

I've had problems too with X2 MR2 SP1, simaulr to what your having but it doesn't happen all time. also have had problems saving the level to a CLV and changing the levels and bring them back they don't always come in. Never had this problem before.

[Midwest]

Sent to Mastercam QC

 

 

Have to wait and see now.

 

 

[Nils N]

good job Midwest