Feed rate is 0

[JDowe]

Probably a setting I cant find

X2 Mill will give only .0001 feed rate when

caculating from material if feed per

tooth is a 3 place decimal ie .004

but it will calculate correctly when using a 2 place decimal ie .04

I looked in machine def under axis feed limits

and it is set to allow 500 ipm max

[crazy^millman]

Look to a format statement in the post for feed rate and see if changing that helps out.

 

HTH

[JDowe]

Sorry guys

I started in Metric config

and switched to English

It will not use 3 places in Metric

and even though I switched to English

it did not reset the calculations parameters

until I restarted Mcam