assigning wcs numbers to mutliple ops

[Dazz]

Hey guys, for some reason the wcs numbers are not being assigned to all ops. I have four positions so four numbers to be assinged on about 70ops but the odd op is being left out, i cant see any pattern to it. Assigning through view manager of course.

 

---------------------------

Mastercam X2 MR2 sp1

 

Mastercam X Mill Level 3

Mastercam X Lathe Level 1

Mastercam X Solids

Mastercam X FiveAxis

 

XP Pro SP2

AMD Athlon64 X2 Dual 5600+

2.81GHz,2.0G Ram

[crazy^millman]

Have you tired doing this in the operations at the work offset manager?

[Dazz]

I ended up assigning through local toolpath parameters (planes).

[crazy^millman]

That is the best way per operations the View Manager is more of an overall tool for each WCS seems to apply them to operations sometimes and then other times you have to do it yourself. What I will do it use the edit common parameters to do a group that is for a certain WCS verse having to go into each operation and do it by operation.

 

HTH

[Dazz]

Cool!!!, i wasn't sure when or how to apply that feature,