X3 coolant question

[DavidSV]

Ok, So I have redone all of my Operation defaults through the control manager and they are all set to turn the coolant on by default. When I go to create a tool path the coolant if off. Can anyone think of something I need to check to make the coolant default to on?

 

Thanks

[3rdstring]

Do you have it set to use tools step, peck, & coolant?

[peon]

It's a bug. See this post. http://www.emastercam.com/ubb/ultimatebb.p...ic;f=1;t=031183

[DavidSV]

I have changed the coolant settings in all my default files and it still doesn't bring my coolant defaults into the operations. I do not have 'use tools step, peck and coolant settings' checked.

 

Does anyone else have a suggestion?

Thanks

[spade117]

quote:

---

I do not have 'use tools step, peck and coolant settings' checked.

---

I do, and so far the coolant has stayed on.

[spade117]

quote:

---

I do, and so far the coolant has stayed on.

---

Oooops...that is until I select a new tool.