need help with verisurf reverse

[jp]

Hi,

 

I need help with verisurf. I have a STL file that I need to change in surface. I tried to apply a surface to my mesh and I always get and error message. "error loading surface fitting DLL" Is this an error of installation or is this a bad usage of the fonction???

 

Thank you

J-P

[Ron Branch @ 5th Axis]

Are you using the Add-on or does your Company uses Verisurf? You can call into the office and ask for support I am here all day and would be glad to try to assist you to get this worked out.

 

1-888-713-7201 I am at ext 36.

1-714-970-1683

[jp]

Hi,

 

I'm using the add-on that I find at "http://www.verisurf.com/mastercam/"

 

I'll e-mail you directly in a few minute for more specific...

 

Thank you

J-P

[Trevor Bailey]

how detailed is your file? can you pot a pick. you can use the add-on to create a patch or multi-surface. you will need project curves to do this. post a pic of the part itself and we can help a little more.

[Tim Martinez]

Ron, did you get his email?

[CNC PRO]

Hi, I am having the same problem as jp (am using the add-on as well)

Wondering if this issue has been resolved, would I be able to get info on how to fix this?

 

Thank you!

[Ron Branch @ 5th Axis]

Tim I took care of it. I had him download the latest from the web site was an STL of a Maple leaf. Tim this his problem involved deal code problems so I am thinking they are different to CNC pro's.

 

CNC pro this is part of our Reverse Package and if you did not buy it then you are limited to the full features. Have you used up your 30 day codes? Trevor is spot on about needing to create a chain network. However the file he had a was a free form type of STL and a chain network would have been a major task. We have a new tool called Auto Surface that created machinable surfaces in about 3 minutes. It turned out very nice and I emailed it to him to show the power and simplicity of it. CNC pro email Tim or myself and we will see if we can help you out.

 

Have a good one.