Networking Vista64 to Haas

[Jrygus]

Anyone networking Vista 64 to Haas ethernet? It works fine on all of our 32 bit XP's. In vista 64 I get an error that says, "Data is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions."

 

I am the administrator of the network. I gave myself administrative privledges on this network account. I must be missing something somewhere, and was hoping maybe someone has tried this before. Or if somebody knows it is not possible....Yet.

[[email protected]]

We had to have HAAS come and put a new board in ours to be compatible with 2003 Server 64bit. I would assume you would have to do the same. It was about $1500.00

[Jrygus]

We already did that when we went to server 2003. Are you using Vista with your haas? Thanks for responding so quick.

[[email protected]]

No, we still have 2003, maybe a vista guru will chime in and help......sorry I couldn't help.

[Dave Ball]

I know it's an obvious question, but are you logged in as admin?

[Jrygus]

I created my accoutn on the Domain with administrative priviedges. I am not using the administrator accout for the Domain though. It may be that i did not give myself admin privledges corectly. I thnk i will check that account again. I am mainly curious if there is anybody already accessing haas machines with Vista. Then i know i am not chasing my tail.

 

Thanks!

[Todd Tracey from Fastech]

Vista Business, Ultimate, or Home Premium??

[Jrygus]

Vista Ultimate!

[Storkman]

even though you have admin rights vista still blocks some files. i took ownership of the entire c-drive and haven't had any problems since.

[Jrygus]

Thanks Terry, i am trying that now. I found a program called take control, i just need to figure out how to apply it to the entire c drive.

[Storkman]

just go to properties for the c drive-security tab- advanced - owner tab- edit, select your profile, check the box for subfolders and hit apply. there will be some file it denies to change but that's ok.

[Jrygus]

That must not be it. I was able to do as you said and it shows me as the owner now, but it did not give me access. One strange thing i noticed is that i can open a command prompt (old schoo stuff here) Then i can run a trace route to the ip adress and or the share name, and they respond fine. Oh well, now that i know that others have made vista communicate with a Haas, i will bring in a network guy and have him look at it. Thanks for the responses. I will post when i have it fixed.