In-House Setup Sheet Help

[dgriffiths]

I have recently made a computer change and upgraded to X3 MRU1 at the same time. I have a clean install and everything is working great. However I have done something to make my In-House HTML setup sheet not work properly. When I generate a setup sheet I am now getting an error everytime. "Errors were detected during posting! Do you want to view the messages?" It creates an error file. I have placed the error file on the ftp in the setup sheet folder called iscohtml.err. After I clear the error the setup sheet does not launch, but it has been created in the same directory as my mcx file. Our other programmer is using the same setup sheet with no problems at all, so I am sure I have screwed something up on my box or in Mastercam. Anybody out there at In-House that can help me.

[dgriffiths]

Bump. Any Ideas???

[ToolMan184]

Do a compare in Cimco Edit and see if you can find the differences between the two. Or just copy his to your computer and see if it works.

[dgriffiths]

That is the strange part. We are both pointing to the same .set file on a server and it is running fine on his box.

[Guest]

Do you have all of the Setup files that should be in your root Mastercam Installation directory?

[Allan]

As John said you will need the supporting files found here:

 

http://www.emastercam.com/tools/html/htmlx2_files.zip

 

HTH

 

Allan

[kevin Knollinger Anderson Global]

Iam trying to down load the html from the link in the above posting. it tells me it is not active Any idias

[Allan]

Since CNC Software has included the Active reports Set-up sheet in X4 and it supports user customizable HTML output. In House Solutions has discontinued sales and support for the HTML set-up sheet.

 

Allan

[chipman]

Try posting to a different directory/folder

[RandleXX]

Did you get this fixed? I think I know what it is..