Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

ToolMan184

Verified Members
  • Posts

    796
  • Joined

  • Last visited

Everything posted by ToolMan184

  1. W F Wells makes a very very nice double column saw.
  2. Josh, If machine builders dont build their own turrets some use a company called "Duplomatic". I hear good things about them. Joe
  3. Mike, Power On Time - 2615 Operating Time - 53976 Cutting Time - 17472 Now from my understanding each of these are in minutes. Is the power on time in hours?
  4. Where can I find "ACTUAL" hours on a machine with a Fanuc 21i control? I have been looking at a 2005 machine that says it has 900 operating hours and 291 cutting hours on it. I know this isnt correct by the looks of it. Is parameter 6750-6754 the only place the hours are logged? I guess anyone can change the time in these parameters or it can be reset if the sram is reloaded. I think I pi**ed the seller off when I told him he was FOS if he thought I believed it had those hours on it.
  5. David, What is the big difference between the GT2100 and the regular 2100? I am looking at a Puma 2600 L and got some info on a GT2600 L. It seems the main difference is the GT has more torque but the regular 2600 is longer. Is the torque the main difference between the two?
  6. We purchased a new Fanuc C600iA almost a year ago. Love It! Excellent machine. We had 2 older Agies and a Chmer. Fanuc is hands down a better machine that these.
  7. I just learned that these machines are now assembled in Taiwan. Even the big dogs are looking for cheap labor.
  8. I have this happen as well. And be careful because when its a bullmill the parameters are different than a chamfer mill. If I select 2d chamfer and it shows as a bullmill I complete parameters, accept operation and open the operation back up, it will then show the correct tool and parameters. HTH
  9. Yeah, Job Boss will match as well. Ask E2 if you can do decimal quantities. It rounds everything to whole numbers. It bit my a** a bunch of times. If you want 10.400" it will round it too 10". With E2 you DONT get out what you put in. But, you have to do what you think is right for your company. I just got tired of the promises E2 never delivered on for over 8 years. With an ERP system if your looking to cheap out you will pay for it everyday.
  10. We used it until the middle of 2014 and ended it and went full Job Boss starting 2015. Job Boss now is based off of SQL and is much better. E2 was still Access or you could upgrade to the SQL for a pretty penny. E2 will sell you enough to get started and get you hooked then ram it in you once you see the other modules you need.
  11. We have had both. JobBoss is way way way better than E2. E2 is still on version 7 and has been for well over 10 years. your maint. will get you eye candy and their bug fixes. They have promised version 8 since IMTS 2006 if that tells you anything. Everytime you ask its always sometime after the first of the year.
  12. Bob, One word about E2......Ruuuuuuunnnnnnnnnnnn. Get Job Boss. I had E2 for over 10 years and switched to Job Boss a couple of years ago. E2 support is not so great and their inventory side will bite you in the arse.
  13. We are in the process of getting a Doosan Mill / Turn machine. What BMT tooling is the best bang for the buck. Doosan is recommending Eppinger. Anyone have any experience with this? Is it good quality? Are there any that use capto? Im having trouble finding any. What other brands are good quality? Thanks!!!
  14. I have the same issue with some operations. Even when I try to launch help it does it, but it usually lets me get to the help window. Sometimes its to the far left hand side and you cant open it at all.
  15. Anyone notice if you have a machine group in the ops manager. You go to design in machine type. Then delete all operations, groups and tools in ops manager. Now try to load a new machine group in the ops manager. It does not load the correct tool bar state. You have to close MC and reopen. Ram saver didnt work, you have to close and reopen. X7 MU1
  16. How do most program lathes? Canned cycles or long code. I see advantages to both. What's some of your pros and cons. Thanks,
  17. I have been working on a setup sheet in active reports. I think I know the answer but want to make sure first. I have a sub report for operation info and a sub report for tool info. If I want to combine these into the same report I will have to create another report and add these two sub reports to it. Is this correct? I had first tried to add the tool info sub to the operation sub. But, that didn't work. I sent this in to support, but I know they are busy. Thought maybe some one here may be an active reports whiz. Thanks,
  18. Chip, Are you using X7? When I put that in it says YES. lol
  19. In active reports what is the tag for Z stock to leave in an operation? I cant find it anywhere. Thanks
  20. It machines about like D2, a little tougher. Slow down about 20% from D2 and everything would be good. HSS will not last long with this stuff. You could do a hole or two but not much after that.
  21. Voted Democrat. :welcome:
  22. Well, I blew away the GUI, remade my custom toolbars and all seems well now. Only thing I done differnt was not use caps and no dashes in the names.
  23. Well I believe I have narrowed it down to a few things. I went back and loaded the default.mtb from the install and it works fine. So, it has to be either: A - A custom name I gave the mtb file. B - The name had a - in it. C - The name was all caps. Only difference between the two. If I blow away the GUI file in the registry will it create a new one when I reopen MC? Or, will I have to do a repair install? Or, is there certain files I can hose in the registry and go from there? I will dig a little deeper tomorrow to see if I can pinpoint the issue.
  24. Any updates on this. I seem to be having the same issue. Brand new box and fresh X7 SP2 install. Toolbar states go crazy and will not stick. And I have several items in the registry.
  25. Now my curiosity is up. Any good info on them?

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...