Mazak Lathe 200-II Nexus using EIA programming?

[Jeff2005]

Is someone using the Mazak Lathe 200-II Nexus?

And are you using the EIA program side instead of the Maztrol programming. If you are then can you send me a sample program of what is suppose to be in the program? We want to use the EIA program but don't have a sample program.

 

thanks,

JEff

[crazy^millman]

Go into the hard drive on the machine and see if there is some example. We use it for the E-Series Integrex, but I know we have some members that are using it for that style of machine.

 

Go to www.integrexmachinist.com

 

They have some stuff on there that might be useful.

[Randy Morton @ Clem Industrial]

I am with Ron, as we have an e-series Integrex as well and program ONLY in EIA. This is an example of my code for this machine...not sure how it translates to the Nexus lathes tho... (bear in mind I have a B axis and Y axis on my machine)

 

HTH

 

code:

---

N2 ( FACE + ROUGH OD - CNMG543 )

G20 G10.9 X1

G91 G30 P4 X0. Y0. Z0. W0.

M901

M202

T1.17 T7 M06 G95

G91 G30 P4 X0. Z0.

G90

M108

G0 G90 B45.

M107 G54

G90 G43 P1 X14.51 Y0. Z1. M51

G18 M239

G92 S800 R1

G96 S700 M204 R1

G0 Z.25

G272 W.125 R.02

G272 P100 Q110 U0. W0. F.018 S700

N100 G0 Z0. S700

G1 X2.

N110 Z.25

G0 X14.51 Z.057

G0 X14.0223

G271 U.175 R.02

G271 P120 Q130 U0. W0. F.018 S700

N120 G0 X13.5911 S700

G1 X13.9725 Z-.1337

G3 X14. Z-.1669 R.0469

G1 Z-2.9206

N130 X14.0223 Z-3.133

G0 Z1.

M9

M205

G91 G30 P4 X0. Y0. Z0.

G90 M740

M01

---

[X-L Engineering Corp]

This is from our Nexus Quick Turn 100-II

 

%

:7580(STRYKER 5400-010-077, REV E, OP 40)

N1( FINISH FACE INSERT - .007R )

G97S1000M04

G28U0.W0.

T0303

M08

G0X.52Z-.0178

G50S3500

G96S350

G1G99X.488F.002

G2X.4524Z0.R.0178

G1X-.0156

G0Z.1

G28U0.W0.

M01

N2( 8.5 MM DRILL)

G97S1372M03

G28U0.W0.

T0909

M08

G0X0.Z.05

G1G99Z-.1F.001

Z-.56F0.002

G0Z.1

G28U0.W0.

M01

N3(4.1 MM DRILL)

G97S2037M03

G28U0.W0.

T0101

M08

G0X0.Z.1

Z-.5

G1G99Z-0.712F.002

G0Z.1

G28U0.W0.

M01

N4(#2 CENTER DRILL GROUND TO .160/.155)

G28U0.W0.

G97S800M03

T0808

M08

G0X0.Z.1

G1G99Z-.87F.002

G0Z.1

G28U0.W0.

M01

N5(GROOVE .047W)

G97S1000M03

G28U0.W0.

T1212

M08

G0X.3Z.05

G50S2500

G96S180

G1G99Z-.3F.015

Z-.335F.0015

X.448F.0005

G0X.3

Z-0.241

G1X.448Z-0.316

Z-.335

X.3

G0Z.1

G28U0.W0.

M00(REMOVE CHIPS)

N6(ROUGH BORE B140700)

G97S1000M03

G28U0.W0.

T0505

M08

G0X.165Z.1

G50S3500

G96S200

G1G99Z-.45F.01

Z-.697,R.02F.002

X.141Z-.7178

G0Z-.45

X.19

G1Z-0.553

X.16

G0Z-.45

X.22

G1Z-0.553

X.18

G0Z-.45

X.25

G1Z-0.553

X.21

G0Z-.45

X.277

G1Z-0.553,R.008

X.24

G0Z-.4

X.3

G1Z-.512

X.27

G0Z-.32

X.33

G1Z-.512

X.3

G0Z.03

X.36

G1Z-.334

X.33

G0Z.03

X.447

G1Z.005F.01

X.383Z-.027F.002

Z-.334

X.3565

X.3465Z-.339

Z-.513

X.275

G0Z.1

G28U0.W0.

M01

N7(FINISH BORE B160750)

G97S1000M03

G28U0.W0.

T0404

M08

G0X0.458Z.025

G50S3500

G96S175

G1G99Z.005F.01

X.389Z-0.0295F0.0003

Z-.335

X.3725

X.3525Z-.345

Z-0.515

X.286

X.28Z-0.518

Z-0.547

G3X.264Z-.555R.008

G1

X0.191

X0.161Z-0.567

G0Z.1

G28U0.W0.

M01

N8(FINISH BORE INSERT - B110400 .800 OUT OF THE BUSHING)

G28U0.W0.

G97S3500M03

T1111

M08

G0X.1912Z.03

G50S3500

G96S300

Z-.5424

G1G99Z-.5524F.00125

X.17Z-.563

Z-.692

G3X.162Z-.7069R.03

G1X.118Z-.745

X.116

G0Z.1

G28U0.W0.

M01

N9(THREAD 7/16-20 ID)

G97S800M03

G28U0.W0.

T0606

M08

G0X.324Z.25

G76P030055

G76X.452Z-.335P.032Q.00191F.05

G1

G0Z.1

G28U0.W0.

M00(CHECK THREAD)

N10(RE-BORE TO DEBURR)

G97S1000M03

G28U0.W0.

T0404

M08

G0X.35Z.1

G50S3000

G96S150

G1G99Z-0.33F0.01

X0.389F0.001

Z-.027

X.453Z.005

G0Z.1

G28U0.W0.

M01

N11(RE-GROOVE)

G28U0.W0.

G97S1000M03

T1212

M08

G0X.3Z.05

G50S2500

G96S180

G1G99Z-0.241F.01

G1X.448Z-0.316F.0007

Z-.335

X.3

G0Z.1

G28U0W0.

M01

N12(RE-THREAD)

G97S800M03

G28U0.W0.

T0606

M08

G0X.324Z0.25

G76P030055

G76X.452Z-.335P.0320Q.00191F.05

G1

G0Z.1

G28U0.W0.

M01

N13(RE-FACE)

G97S1000M04

G28U0.W0.

T0303

M08

G0X.52Z-.0178

G50S3500

G96S350

G1G99X.488F.002

G2X.4524Z0.R.0178

G1X-.0156

G0Z.1

G28U0.W0.

M30

%

 

Hope that's what you were looking for?

[TMozzone]

The .eia programs here are just standard G-code programs ran as stand alones, also we have some machine the Mazatrol is the driver and EIA are treated as subs.

[Jeff2005]

Guys this helps alot.

 

Thanks,

Jeff