I know it's Monday, but WHAT HAPPENED TO MY POST OUTPUT?!

[Mic6]

I came in this morning, finished a toolpath from last week, went to post and I'm getting what looks like ref. positions with block deletes in the beginning of the program, and I'm not getting my work offset. WTH? Maybe a MD/CD prob? I went into my toolpaths and made sure Home/Ref points were zero'd out, but htye still posted.

 

code:

---

 %

O1111( FTS CHILLER LID FILL GUAGE BUNG )

( T21 | INGERSOLL 2" FACEMILL | H21 )

( T19 | .500 DATE FLUTE | H19 | D19 | DIA: .5 )

( T24 | .125 X 45 DEG CHAMFER MILL | H24 | D24 | DIA: .125 )

( T5 | DOUBLE ANGLE CHAMFER TOOL | H5 | D5 | DIA: .75 )

( T13 | .315 BORING BAR | H13 )

G20

G0 G17 G40 G49 G80 G90

G91 G28 Z0 / G91 G28 Z0. <--------Double Codes

/ G28 X0. Y0. <--------This is new!

/ G92 X0. Y0. Z0. <------This new also

( CLEAN-UP SURFACE )

T21 M6 ( INGERSOLL 2" FACEMILL | T: 21 | D: 21 | H: 21 | DIA: 1.9965 )

G0 G90 X-2.2979 Y0. C0. S6000 M3 <----Where's my work offset, and why is there a C address?!

G43 H21 Z.25 T19

/M8

G1 Z0. F25.

X2.2979 F45.

G0 Z.25

M9

M5

G91 G28 Z0.

M01

---

buuut, the last 2 of 7 ops post fine(showing 1). They both have work offsets in the output.

 

code:

---

( CHAMFER BOTTOM OF THRU HOLE )

N5 G91 G28 Z0

G80 G49 G40 G20 G17

T5 M6 ( DOUBLE ANGLE CHAMFER TOOL | T: 5 | D: 5 | H: 5 | DIA: .75 )

G0 G90 G54 X.165 Y0. C0. S6000 M3

G43 H5 Z.25 T13

M9

/M8

Z.1

G1 Z-1.115 F50.

G3 X0. Y.165 I-.165 J0. F30.

X-.165 Y0. I0. J-.165

X0. Y-.165 I.165 J0.

G41 D5 X.165 Y0. I0. J.165

---

Things were working perfect all day thursday , and no one else has been on this computer since.

[Tony35]

did you get this warning

 

this monday has failed try again next week

 

[3R!< W3NG3R]

try reloading your machine def in toolpath group properties.

[HT]

Look like you need to reset misc value of that tool path.

Work Coodinates(0-1=G92,2=G54), right now it may set at 0 try change to 2 see if it work. HTH

[Mic6]

Reloaded the def, and checked all the misc int and everything's back to normal now. Uggh. Thanks guys

[3R!< W3NG3R]

[Guest CNC Apps Guy 1]

quote:

---

...this monday has failed try again next week...

---

ROFL