drilling cyle gone after updating post

[JOHNAKA]

Hi

 

update the post from x3 to x4, everyting went ok except drilling,

 

1 - 15 Jun 2009 01:05:56 PM - UpdatePost Utility

2 - 15 Jun 2009 01:05:56 PM - ***** Starting update processing *****

3 - 15 Jun 2009 01:05:56 PM - The user has chosen the selected post(s) type as: LATHE

4 - 15 Jun 2009 01:05:56 PM - The user has chosen the selected post(s) version as: 12.00

5 - 15 Jun 2009 01:05:56 PM - Option to create the Machine Definition is: Off

6 - 15 Jun 2009 01:05:56 PM - Option to create the Control Definition is: Off

7 - 15 Jun 2009 01:05:56 PM - Option to silently overwrite existing files is: Off

8 - 15 Jun 2009 01:05:56 PM - Processing a single post processor file.

9 - 15 Jun 2009 01:05:56 PM - The user is being prompted to overwrite: C:MCAMX4LATHEPOSTSHAAS SL30.pst

10 - 15 Jun 2009 01:05:57 PM - The original file: C:Documents and SettingsjohnbDesktopkingstonbackuplatestmcx3lathepostpostsHAAS SL30.pst

11 - 15 Jun 2009 01:05:57 PM - Copied to: C:MCAMX4LATHEPOSTSHAAS SL30.pst

12 - 15 Jun 2009 01:05:57 PM - The user is being prompted to overwrite: C:MCAMX4LATHEPOSTSHAAS SL30.pst_vX3

13 - 15 Jun 2009 01:05:59 PM - The original file: C:MCAMX4LATHEPOSTSHAAS SL30.pst

14 - 15 Jun 2009 01:05:59 PM - Backed up as: C:MCAMX4LATHEPOSTSHAAS SL30.pst_vX3

15 - 15 Jun 2009 01:05:59 PM - Initialize processing the post

16 - 15 Jun 2009 01:05:59 PM - Post processor file name: C:MCAMX4LATHEPOSTSHAAS SL30.PST

17 - 15 Jun 2009 01:05:59 PM - The post processor file has been successfully opened.

18 - 15 Jun 2009 01:05:59 PM - Post version information (input):

19 - 15 Jun 2009 01:05:59 PM - UPDATEPOST Version 10. was used to modify this file.

20 - 15 Jun 2009 01:05:59 PM - The file was modified by this product on 27 Jun 05 15:04:36

21 - 15 Jun 2009 01:05:59 PM - The post was written to run with Mastercam Version 10.

22 - 15 Jun 2009 01:05:59 PM - The post product type is Mill/Turn.

23 - 15 Jun 2009 01:05:59 PM - Initialization of pre-defined post variables, strings, postblocks was successful.

24 - 15 Jun 2009 01:05:59 PM - Search for defined post variables, strings, postblocks was successful.

25 - 15 Jun 2009 01:05:59 PM - Initiate writing the post processor file(s).

26 - 15 Jun 2009 01:05:59 PM - Post version information (output):

27 - 15 Jun 2009 01:05:59 PM - Post processor file name: C:MCAMX4LATHEPOSTSHAAS SL30.PST

28 - 15 Jun 2009 01:05:59 PM - UPDATEPOST Version 13. is processing this file.

29 - 15 Jun 2009 01:05:59 PM - The post is targeted to run with Mastercam Version 13.

30 - 15 Jun 2009 01:05:59 PM - The post product type is Lathe.

31 - 15 Jun 2009 01:05:59 PM - PST LINE (1455) - Label has not been defined[*29]

32 - 15 Jun 2009 01:05:59 PM - PST LINE (1525) - Label has not been defined[*29]

33 - 15 Jun 2009 01:05:59 PM - PST LINE (1459) - Label has not been defined[*29]

34 - 15 Jun 2009 01:05:59 PM - PST LINE (1529) - Label has not been defined[*29]

35 - 15 Jun 2009 01:05:59 PM - Writing the post was successful.

36 - 15 Jun 2009 01:05:59 PM - PARAMETER DATA - - This 'parameter read' postblock was found in the post: pparameter$, This 'parameter read' postblock was found in the post: pwrttparam$, Parameters are changed in Mastercam X. Reference the post update guide or contact your reseller.

37 - 15 Jun 2009 01:05:59 PM - PST LINE (1463) - Label has not been defined[*25]

38 - 15 Jun 2009 01:05:59 PM - PST LINE (1531) - Label has not been defined[*25]

39 - 15 Jun 2009 01:05:59 PM - ***** End of update processing *****

 

done everything i could but still no luck here is the drill cycle

(TOOL-6OFFSET-6)

(DRILL.625DIAM-5/8)

(INSERT-NONE)

(DRILLTHEPARTTHRU)

G28U0.V0.W0.

G54

T0606

G97G99S1000M03

G0X0.Z1.

M8

Z.25

CUSTOMIZABLEDRILLCYCLEX0.Z-1.4494

Z1.

M9

G28U0.W0.M05

T0600

[JOHNAKA]

maybe im the only one who ecounter that problem

[Guest]

Check with your reseller, probably the best advice at the moment

[Thermoform Guy]

John,

I had a problem with my drilling cycles recently

after I installed the latest window update that

included IE8. I had this problem with X3. Our IT

guy removed IE8 and I reinstalled X3. I now use

Firefox. It correct the problem and since then

I have installed X4 and so far no problems with

my drill cycles.

HTH

Dave

[Thermoform Guy]

John,

I forgot to add that I run Vista 64 bit.

[Jim Evans from CNC Software]

Your post has errors that the update post utility logged in the ERROR file (Label has not been defined). The most common causes here are a variable isn't defined or the variable definition was commented out (common mistake).

 

If you are post savvy, then start by looking in your post where the error occurred "POST LINE (XXXX)" and start by checking for the variable definitions of the variables on this line. I'm sure it's pretty simple fix but if you are not comfortable with posts, contact your reseller for help.

[JOHNAKA]

ok, these error that shown in the updated log is whatsoever not relating to the drilling, it was the machine definition.I just unchecked simple drill no and peck drill full retruct, and it worked fine

[Jim Evans from CNC Software]

Where did you uncheck simple drill and peck drill???

 

We should still get those post errors corrected even if they aren't affecting your code at this time.

[JOHNAKA]

in the control definition, simply it was making the path to the custmizable drill cycle