Post Problems

[JAMES GABEL]

I am posting a left and right of some parts that I am running and it is posting out different code on each program. The first program puts out the code perfect. The second code for the right side of the part is putting G30.

 

At the end of all my code I have a G91 G28 Z0.

 

One of the code is putting out G91 G30 Z0.

 

Can anyone tell me how this could happen?

[Leigh @ Kodiak]

Are you using a transform operation to make the mirrored part? G30 can be cancel mirror, depending on your control. so I would suspect that is why you are getting it.

 

Is there a G31 or G32 in your program?

[Superman]

Miscellaneous Integers can also have an effect on this output. Have you imported operations and not reset the integers back to the defaults ?

[Josh T™]

You can always cheat and hard overwrite the "G30" to a "G28".... works like a charm!

[JAMES GABEL]

It was the miscellaneous integers. I ran the program on a machine that using them and than I had to run it on a machine that I don't. I got bit on that one. Thank you for your help.