Fanuc om control parameter

[gary adams]

We have a Dahlih mcv1020 maching centre and we want to change the interval that the slidway lube pump comes on, does anyone on this excellent site have the parameter number.

[Greg Williams]

Is there a local Machine dealer?

[Newbeeee™]

Its probably a timer on the keep relay side of things

[connormac]

I think newbeee is correct. We had to have service come out and change our timer for the same thing. I think it was in the keeper section of parameter.

[gary adams]

Thanks for replies.

Gary

[Guest CNC Apps Guy 1]

System, Parameter, PMC, PMCPRM, Timer is usually the place. You should have have a manual that describes what each Timer, Data, and Keep Relay parameter is set to. Like the others said, you should contact your Machine Tool Dealer to make sure you get the right one, and most importantly the right interval. We have a customer machining caramic, their way lube goes off like 10x more than normal. They have to fill the tank once per day, but it keeps things clean.

 

HTH

[moeh]

If I remember correctly, the 0M control does not have Keep Relays - best bet is to contact manufacturer