Renumber tools

[Salt4cad]

Has any one had trouble renumbering tools.

 

[strabe]

No. I do it all the time. What kind of problem are you having?

[Salt4cad]

Just will not renumber, the only differance I did was I copied down the tools in the tool manager, other than that it usually it works.

[Salt4cad]

Well. I foound out what it was.

You can not remunber tool using multiple machine groups.

Thank Mastercam You did it again

[htm01]

that's goood!

[twhaler]

I have a question about changing tool numbers in the operations Manager.

 

In version X3 we were able to have “Machine Group Properties”-“Tool Settings” - Feed calculation set to (user defined).

 

Then we could open the Parameters for a tool and Edit the Tool Number without changing any existing feed and speed settings.

 

 

 

In X4 if we edit the Tool Number going through the Operation Parameters fields, the system will change the length offset and diameter offset but NOT THE Tool number.

 

Is this a bug or is this intentional?

 

Tim