Multi Pass

[X-L Engineering Corp]

I don't know if someone has covered this but I'm having problems with this. The retract is not going to its point between tool paths no matter what I do to select the points. If its me maybe someone can show me what I’m doing wrong.

[Tony35]

do you have "keep tool down" ticked by chance

[HEED]

Incremental or absolute retract? It's bitten me plenty of times 'cause it defaults to .1 incremental.

[X-L Engineering Corp]

Sorry for the slow reply but we are working only 8hrs a day 4 days a week and at home the rest of the family gets the Computer.

 

quote:

---

do you have "keep tool down" ticked by chance

---

No

quote:

---

Incremental or absolute retract? It's bitten me plenty of times 'cause it defaults to .1 incremental.

---

I use Incremental but I always select the point I want to ref, to?

[Hardmill]

quote:

---

I use Incremental

---

Always a bad thing in my opinion, because that

one time you dont set it right will be when you

really dont have time to do it again.

 

 

PEACE

[X-L Engineering Corp]

Changing it back to Absolute worked but if I'm selecting the point even in Incremental it should still work?

[X-L Engineering Corp]

Bump

[Matthew Hajicek - Singularity]

Can you put the file on the FTP so we can take a look at it?

 

"Lilu Dallas Multipass!"

[X-L Engineering Corp]

I'll see about doing that

quote:

---

"Lilu Dallas Multipass!"

---

I thought of the same thing when I was typing it

"The 5th Element"