X4 opening file problem.

[Ron Branch @ 5th Axis]

My coworker was working on a fixture program. Yesterday and everything was done. He came in today and was going to make the set-up sheet. He gets the following error.

 

Error Reading File. Click Ok

Unknown Operation. Click Ok

Error Reading File. Click Ok

Error Reading File. Click Ok

Cannot open file: C:CNCM2059JIG-100.MCX

It is a file from a newer Mastercam version or is not a file format recognized by Mastercam. Click Ok.

 

Now all of the solids and level and geometry show up, but all the toolpaths are gone.

 

Has anyone have a clue what is going on??

 

I have told him to start over but this is something I have never seen goo all they was back to 2 days worth of back ups. He has back up from the after noon of 2 days ago and the morning of yesterday and all 5 do the same thing as the original. It has been sent to QC, but I am pretty upset he has lost 6 hours work of work.

 

Oh and I did not realize I had my Verisurf Name up this is for V & M not for Verisurf.

[gcode]

X4 file trying to open with X2

X4 with X3 machine loaded???

guessing

 

edit... try opeing it on a different computer.

[Ron Branch @ Verisurf]

Tom X4 is all that is loaded on both. Worked fine for 2 days and now it just does not work. I tried it on my computer, my laptop, and my computer at home all could not open it.

[gcode]

Shoot it my way.. I'll give it a shot