Contract job available

[E3CADCAM]

We are currently looking for a source to program 5-axis porting on a cylinder head. A large project deadline has been moved up by two months, and the porting has not yet been completed. The heads are for a four cylinder engine, two cylinders per head. The shape is similar to a small block port, scaled down and fit into a much smaller package.

If anyone is interested in providing a program (MCX file preferred); fixture, tool and part geometry will be provided. We would need the program in roughly a week to a week and a half from now.

 

Please email me for details.

[Ron Branch @ Verisurf]

Time line is too tight. I would say 3-4 weeks would be the earliest I could squeeze it in.

[ak762]

Perhaps I am wrong but if I correct understand 5 axis strategy depends from machine configuration and hence depends from postprocessor.

Normally such posts are SIM/HASP locked

I am wondering, will you going to provide such data?

[crazy^millman]

What you do it make a program based off the machine configuration send the Mastercam file and then the customer posts it using their post.

 

HTH