Toolpath Locked

[SteveD]

I am scaling down mill level 3 tutorial #4 by 50% to fit my machine.

 

I changed tools to something smaller to fit the part as well.

 

I get a Toolpath Locked on the surface finish Blend, my 4th operation.

 

Does anyone know how to resolve this?

 

Thanks,

Steve

[jeff]

Highlight the toolpath and select the Unlock button and then regen.

[ReDEyZZ]

Did you hit the lock button by accident? In the operations manager there is a little gold lock symbol, use it to toggle the lock off and on.

 

Or am I misreading your question?

[[email protected]]

On your tool page of parameters does it by any chance say "Repaired NCI"?

[LA CAMmer]

Highlighting a toolpath and pressing "L" on the keyboard will also lock and unlock a toolpath.

[Goldorak]

quote:

---

On your tool page of parameters does it by any chance say "Repaired NCI"?

---

x100

 

generally this is the cause of an unwanted locked operation

[Superman]

quote:

---

--------------------------------------------------------------------------------

On your tool page of parameters does it by any chance say "Repaired NCI"?

 

--------------------------------------------------------------------------------

 

generally this is the cause of an unwanted locked operation

---

OR... if not a "Repaired NCI"

The operation will "Lock" after editing the calculated toolpath, to avoid it being accidently regenerated, and losing your changes or mods