How to hide toolpaths?

[kender]

Folks,

 

I’m very green to MasterCAM. So far, I’ve imported an IGES file, created half a dozen toolpaths, and my screen looks like a rat’s nest. Is there a way to hide toolpaths?

 

As always, any suggestions, references, insight are appreciated!

 

Almost forgot - I'm working on X4.

 

- Nick

[Odell]

Click the wavy lines above tree. "Toggle Tool path"

[gcode]

the hotkey is

 

ALT T

[PeterM]

Hi there, welcome to the forum. Here's what you do.

Go to system configuration. Scroll down to toolpaths. Uncheck repaint toolpath. That should fix you up. Btw don't be shy about looking in help first, then do a search in this forum, many problems have been explored and discussed many times, and can get you going faster.

[kender]

Thank you for the tips, folks!

 

Since I'm going through the learning curve on my own, my CAM and MasterCAM terminology is a little weak. That could be the reason why I'm not always finding what I'm looking for in help.

 

Sincerely,

- Nick

[Mr. Wizzard]

if you want to see only the ones you have selected, toggle the "only display selected toolpaths" button at the top of the ops manager