Cursor Mastercam and Geforce2 MX

[Woltjer]

Is there realy no solution to display the cursor on a black background in mastercam with a Geforce 2 MX video adapter ?

 

I rather don't want to buy a new one.

[Bullines]

You cou;d try fiddling with hardware acceleration or trying various versions of the Detonators. But facts are facts:

 

http://www.emastercam.com/info/hardware.html#video

[d0gFartz]

ftp://mastercam:[email protected]/Ma.../Video_Drivers/

 

try the detonator 3 drivers in that folder

[Stewron]

Woltjer,

Email me and I'll send you the driver we use. The Dell PC's we bought had this problem but this driver sorted it.

 

[email protected]

[Guest CNC Apps Guy 1]

There's enough topics abot this video card or that video card and I think they've all been covered.

 

It would be nice if people would do a search for their video card model and see what comes up. Before beating this dead horse some more, do the check.

 

Webby, how about making a tech topic for graphics related issues. You know for problems related to Brand X video card, download these drivers, and provide a ling to Jay's FTP.

 

Just a thought.

[Bullines]

Here's a start:

 

http://www.emastercam.com/info/hardware.html#video

[cadcam]

James I am with you I think that if you have proven drivers please load them to the FTP under Video so that the users can find them.

[Andy]

What finally worked for me a year ago was use older drivers. I tried everything else and nothing worked. As James said search this subject.

Those older drivers are on Jays' website.

 

[ 09-26-2002, 04:32 PM: Message edited by: Andy ]

[Guest]

I was able to get old drivers to work also. However, I had to reduce the hardware acceleration so much that it affected the over all performance of my computer. I bought a 3dlab vx1 card. It works great.