Verification Problems

[Mykal]

Just courious if anyone running V9 with a Nivida 4400TI 128mb card on a P4 with at least 1/2gig RAM has had problems with solid verify in Mastercam. Currently it's running slow as ever. Didn't have the problem with V8.1.1 on P3's without the video card!?!?

[cadcam]

I have not found this to be an issue with the last three boxes I constructed in the layout that you stated.

 

One with XPpro and the other 2 with win2k.

 

Have you check the speed setting or the quality to speed setting?

[ssibiski]

I don't seem to have any problems on my system.

solid verify runs fast and smooth.

what a difference a new comp makes. My last comp was a p2 244 now that was slow

feels nice to come out of the dark ages

 

ssibiski

[Glenn Bouman]

Try deleting the C:Mcam8MillOpsVERIFY.PRM file, and try it again.

[Mykal]

Thanks to all for the info! Seems from talking to the Mastercam dealer and reading the "what's new" in the 9.1 beta information that I'm now running, there was a problem with the verification engine which has been fixed for the upcoming V9.1 standard load. The V9.1 beta verification literally smokes...........