Bridging a c-bore in a surface

[J Coulston]

Surface Over Cbore.jpg

 

I have a surface that has a few counter bores and holes running through it. Is it possible to bridge over the counter bore to prevent the tool path from entering it? Currently the tool path avoids the counter bore. I am trying use Surface Finish shallow, how do I tell the tool paths to ignore the cbore and continue over it?

 

Thanks for you suggestions

 

John

[George Vassilev]

Did you try create/surface/trim_extend/fill holes

[Jean-Simon]

Hi John, sorry I don't have access to ftp but as I see you could try create surface trim/extend fill holes and then click on your surface and drag the arrow to your hole edge and then it's gonna prompt you "fill all internal holes" you say yes if you want all holes to be closed in one click. Hope it helps!

[J Coulston]

Thanks for the help. That worked great, I got into this project a little prematurely, any thing to keep the customer happy.

 

Thanks again

 

John