Post for a Mazak

[Daniel Pinsonneault]

I need a post for a Mazak SQT-500 lathe with a proper configuration to drive the C-axis. The controler is a PC-Fusion 640-T.

[gcode]

Daniel,

Perhaps you should read the FAQ's.

[Rekd™]

You'll find what you need HERE

 

'Rekd

[Cowboy]

Why can't a post be found or discussed here? Mazaks are a pain to configure with Mastercam so this forum was my first choice with a post problem as well. Nothing against our reseller, but Mazatrol seems a bit out of thier boundries. I'm stuck with a Mazak and so be it, but why not have somewhere that we can exchange all of the proven Mazak posts back and forth to each other??

Just asking, just making a suggestion, no harm meant to anyone, especailly our rep or Mastercam, both are 1st class.

Rich

[Rekd™]

quote:

---

Q. Does anyone have a post for a [insert machine or control name here]?

 

A. Ask this question as your first message here and you won't necessarily like the responses you receive. Look to your reseller to supply you with the proper post for your machine, or quote for the work that needs to be done.

 

If you have something and are looking for improvements, it's a reasonable request. Maybe tell us why the post you have needs improvement.

 

Perhaps try to participate a bit on the Forum before you go asking for something. Not unlike Habitat for Humanity, we value Sweat Equity here. Quid pro quo, Clarice.

 

You may also want to let everyone know your company name so that your Hotmail or Yahoo email account doesn't give everyone the impression that you aren't a licensed Mastercam user.

 

[ 03-13-2003, 05:21 PM: Message edited by: Webmaster ]

---

This was taken from the link I provide above. It should shed some light.

 

'Rekd

[Allan Brown]

Hi Daniel,

 

Please contact CAP Technologies to request this post. I've forwarded a post that I believe should be appropriate, based on my Integrex work.