X5...Machine Group Properities

[Code_Breaker]

How do you change the defaults in Machine Group Properities?

[Guest]

Permantly or for a file?

 

Perm change is done in the control def under the "files" branch

 

temp, can be done in the machine group properties by clicking on the folder at the end of the Operation Defaults and selecting a different file

[Code_Breaker]

Permanently ... I tried Control Definition but noithing is listed under 'Control Topic:'=> 'files' ...

[Guest]

Permanently ... I tried Control Definition but noithing is listed under 'Control Topic:'=> 'files' ...

 

[K2csq7]

Are you looking to change file paths? Settings- Configuration-files on the left.

Heard you had trouble "Breaking the Code" to get in...Welcome back!

[Code_Breaker]

I guess I wasn't clear with my question:

 

In the Operation Manager, under the Machine Definition, you have "Properities" then you have 4 selections to choose from ...

 

Files

Tool Settings

Stock Setup

Safety zone

 

I especially want to change, permanently, the defaults under "Tool Settings"

 

For example, under "Toolpath Configuration" I want the box CHECKED for "Assign tool numbers sequectially"

 

Sorry to be so wordy ...

 

Keith ... thanks

[Sbarner]

Click the exclamation point under the operation defaults section. Edit away.

[Code_Breaker]

Thanks Steve ... well done ...

[Hardmill]

 

Heard you had trouble "Breaking the Code" to get in...Welcome back!

 

 

 

 

 

 

 

 

PEACE