Digitizer and Verisurf

[B.D.]

We currently have a Renishaw Cyclone digitizer. We were looking at getting some software to reverse engineer the point cloud it can create.

Did a demo with Rapidform yesterday, it was very cool and fast, created a solid from point cloud imported in Solidworks with feature tree. I know one of the selling points of Verisurf is that it runs in Mastercam. From what i've seen on the website it looks like it runs in real time while you work with it... does anyone know if Verisurf will work with our digitizer???

 

Thanks,

[gcode]

I moved you post to the main fourm..

Hopefully Ron Branch, our resident Verisurf expert will see it and answer your question

[Ron Branch @ 5th Axis]

We work with many different devices and would need some more specific information about your device. When you say demo they took one of your parts and reversed it or they took one of their parts and revered it? Rapid form is good software and we are good software comes down to what you are looking to do and get out of the software. We do work inside of Mastercam and can reverse engineer creating solids in many different ways. Comes down to what you are looking to do and how you want to get there. If you want to measure parts, see quality of the parts and then have something inside of one software for the reversing, machining and then checking of that part Verisurf on top of Mastercam is the answer. Shot me an email and I will be glad to have one of our RSM get in touch with you and go over setting up a demo and showing what Verisurf can do.

[B.D.]

U got mail.