calling any Mazak Variaxis guys who use inverse time

[Jeremy Herron@DBS Solutions™]

Hello all. I have 2 mazak variaxis 730's with matrix controllers. I recently had software updates done to my controllers and updated my posts to X5. I have not been able to get the controller and my post to shake hands on inverse time feedrates since. Can someone try a quick toolpath and post results so I can check against mine. Draw a rectangle centered on the origin 1" x 1". Create a point 6" below the origin. use a curve 5 select the square as your chain and to point for axis control distance increment set to .050. I get:

 

G93 X.00001 Y.68514 Z.07875 A-6.557 C316.47 F563.53

X0. Y.66849 Z.07495 A-6.397 C318.013 F579.48

X0. Y.6367 Z.06795 A-6.091 C321.34 F303.93

X.00001 Y.62164 Z.06475 A-5.947 C323.131 F641.69

X0. Y.60719 Z.06176 A-5.808 C325.008 F669.35

X0. Y.58036 Z.0564 A-5.551 C329.036 F360.55

X0. Y.56807 Z.05403 A-5.433 C331.19 F786.19

X0. Y.55661 Z.05186 A-5.323 C333.435 F841.65

X0. Y.54602 Z.0499 A-5.221 C335.773 F909.04

X0. Y.53636 Z.04814 A-5.129 C338.199 F993.71

X0. Y.52768 Z.04659 A-5.046 C340.711 F1101.76

X0. Y.52005 Z.04524 A-4.972 C343.302 F1243.42

X0. Y.50807 Z.04318 A-4.858 C348.692 F777.73

X0. Y.50074 Z.04194 A-4.787 C354.291 F1174.83

X0. Y.49827 Z.04152 A-4.764 C.001 F2065.94

X0. Y.49889 Z.04163 A-4.77 C2.864 F4600.05

X0. Y.50074 Z.04194 A-4.787 C5.712 F3558.75

X0. Y.50381 Z.04245 A-4.817 C8.533 F2660.29

X0. Y.50808 Z.04318 A-4.858 C11.313 F2074.34

X0. Y.52006 Z.04525 A-4.972 C16.702 F774.19

X0. Y.53637 Z.04814 A-5.129 C21.804 F582.65

X0. Y.54603 Z.0499 A-5.221 C24.23 F992.73

X0. Y.55662 Z.05186 A-5.323 C26.567 F908.34

X0. Y.58037 Z.0564 A-5.551 C30.966 F405.71

X0. Y.6072 Z.06177 A-5.808 C34.993 F359.73

X-.00001 Y.62165 Z.06476 A-5.947 C36.871 F668.77

X0. Y.63671 Z.06795 A-6.092 C38.661 F641.48

X0. Y.6685 Z.07495 A-6.397 C41.988 F303.51

X0. Y.70225 Z.08276 A-6.721 C45. F285.5

X.00001 Y.68514 Z.07875 A-6.557 C46.47 F563.71

X0. Y.66849 Z.07495 A-6.397 C48.013 F579.84

X0. Y.6367 Z.06795 A-6.091 C51.34 F304.29

X.00001 Y.62164 Z.06475 A-5.947 C53.131 F642.61

X0. Y.60719 Z.06176 A-5.808 C55.008 F670.47

X0. Y.58036 Z.0564 A-5.551 C59.036 F361.31

X0. Y.56807 Z.05403 A-5.433 C61.19 F787.99

X0. Y.55661 Z.05186 A-5.323 C63.435 F843.71

X0. Y.54602 Z.0499 A-5.221 C65.773 F911.4

X0. Y.53636 Z.04814 A-5.129 C68.199 F996.41

X0. Y.52768 Z.04659 A-5.046 C70.711 F1104.87

X0. Y.52005 Z.04524 A-4.972 C73.302 F1247.01

X0. Y.50807 Z.04318 A-4.858 C78.692 F780.

X0. Y.50074 Z.04194 A-4.787 C84.291 F1177.86

X0. Y.49827 Z.04152 A-4.764 C90.001 F2067.82

X0. Y.49889 Z.04163 A-4.77 C92.864 F4601.35

X0. Y.50074 Z.04194 A-4.787 C95.712 F3564.11

X0. Y.50381 Z.04245 A-4.817 C98.533 F2666.37

X0. Y.50808 Z.04318 A-4.858 C101.313 F2079.81

X0. Y.52006 Z.04525 A-4.972 C106.702 F776.32

X0. Y.53637 Z.04814 A-5.129 C111.804 F584.2

X0. Y.54603 Z.0499 A-5.221 C114.23 F995.29

X0. Y.55662 Z.05186 A-5.323 C116.567 F910.56

X0. Y.58037 Z.0564 A-5.551 C120.966 F406.56

X0. Y.6072 Z.06177 A-5.808 C124.993 F360.33

X-.00001 Y.62165 Z.06476 A-5.947 C126.871 F669.73

X0. Y.63671 Z.06795 A-6.092 C128.661 F642.24

X0. Y.6685 Z.07495 A-6.397 C131.988 F303.7

X0. Y.70225 Z.08276 A-6.721 C135. F285.5

X.00001 Y.68514 Z.07875 A-6.557 C136.47 F563.53

X0. Y.66849 Z.07495 A-6.397 C138.013 F579.48

X0. Y.6367 Z.06795 A-6.091 C141.34 F303.93

X.00001 Y.62164 Z.06475 A-5.947 C143.131 F641.69

X0. Y.60719 Z.06176 A-5.808 C145.008 F669.35

X0. Y.58036 Z.0564 A-5.551 C149.036 F360.55

X0. Y.56807 Z.05403 A-5.433 C151.19 F786.19

X0. Y.55661 Z.05186 A-5.323 C153.435 F841.65

X0. Y.54602 Z.0499 A-5.221 C155.773 F909.04

X0. Y.53636 Z.04814 A-5.129 C158.199 F993.71

X0. Y.52768 Z.04659 A-5.046 C160.711 F1101.76

X0. Y.52005 Z.04524 A-4.972 C163.302 F1243.42

X0. Y.50807 Z.04318 A-4.858 C168.692 F777.73

X0. Y.50074 Z.04194 A-4.787 C174.291 F1174.83

X0. Y.49827 Z.04152 A-4.764 C180.001 F2065.94

X0. Y.49889 Z.04163 A-4.77 C182.864 F4600.05

X0. Y.50074 Z.04194 A-4.787 C185.712 F3558.75

X0. Y.50381 Z.04245 A-4.817 C188.533 F2660.29

X0. Y.50808 Z.04318 A-4.858 C191.313 F2074.34

X0. Y.52006 Z.04525 A-4.972 C196.702 F774.19

X0. Y.53637 Z.04814 A-5.129 C201.804 F582.65

X0. Y.54603 Z.0499 A-5.221 C204.23 F992.73

X0. Y.55662 Z.05186 A-5.323 C206.567 F908.34

X0. Y.58037 Z.0564 A-5.551 C210.966 F405.71

X0. Y.6072 Z.06177 A-5.808 C214.993 F359.73

X-.00001 Y.62165 Z.06476 A-5.947 C216.871 F668.77

X0. Y.63671 Z.06795 A-6.092 C218.661 F641.48

X0. Y.6685 Z.07495 A-6.397 C221.988 F303.51

X0. Y.70225 Z.08276 A-6.721 C225. F285.5

X.00001 Y.68514 Z.07875 A-6.557 C226.47 F563.71

X0. Y.66849 Z.07495 A-6.397 C228.013 F579.84

X0. Y.6367 Z.06795 A-6.091 C231.34 F304.29

X.00001 Y.62164 Z.06475 A-5.947 C233.131 F642.61

X0. Y.60719 Z.06176 A-5.808 C235.008 F670.47

X0. Y.58036 Z.0564 A-5.551 C239.036 F361.31

X0. Y.56807 Z.05403 A-5.433 C241.19 F787.99

X0. Y.55661 Z.05186 A-5.323 C243.435 F843.71

X0. Y.54602 Z.0499 A-5.221 C245.773 F911.4

X0. Y.53636 Z.04814 A-5.129 C248.199 F996.41

X0. Y.52768 Z.04659 A-5.046 C250.711 F1104.87

X0. Y.52005 Z.04524 A-4.972 C253.302 F1247.01

X0. Y.50807 Z.04318 A-4.858 C258.692 F780.

X0. Y.50074 Z.04194 A-4.787 C264.291 F1177.86

X0. Y.49827 Z.04152 A-4.764 C270.001 F2067.82

X0. Y.49889 Z.04163 A-4.77 C272.864 F4601.35

X0. Y.50074 Z.04194 A-4.787 C275.712 F3564.11

X0. Y.50381 Z.04245 A-4.817 C278.533 F2666.37

X0. Y.50808 Z.04318 A-4.858 C281.313 F2079.81

X0. Y.52006 Z.04525 A-4.972 C286.702 F776.32

X0. Y.53637 Z.04814 A-5.129 C291.804 F584.2

X0. Y.54603 Z.0499 A-5.221 C294.23 F995.29

X0. Y.55662 Z.05186 A-5.323 C296.567 F910.56

X0. Y.58037 Z.0564 A-5.551 C300.966 F406.56

X0. Y.6072 Z.06177 A-5.808 C304.993 F360.33

X-.00001 Y.62165 Z.06476 A-5.947 C306.871 F669.73

X0. Y.63671 Z.06795 A-6.092 C308.661 F642.24

X0. Y.6685 Z.07495 A-6.397 C311.988 F303.7

X0. Y.70225 Z.08276 A-6.721 C315. F285.5

G00 Z1.08276

 

Any help would be appreciated.

[Robert Gleim_Boeing Co.]

What Feed did you use, Tool size, and where did you start your chain.

[Jeremy Herron@DBS Solutions™]

Sorry. that would have ben helpful information:

 

1/4" ball endmill at 100 inches minute, and I started the chain a the top right corner going counter-clokwise.

[Robert Gleim_Boeing Co.]

G93 Y-.6685 Z.075 A-173.603 C-41.989 F1000.

Y-.6367 Z.0679 A-173.908 C-38.661 F1000.

Y-.6072 Z.0618 A-174.192 C-34.992 F1000.

Y-.5803 Z.0564 A-174.449 C-30.96 F1000.

Y-.5566 Z.0519 A-174.677 C-26.563 F1000.

Y-.5364 Z.0481 A-174.871 C-21.804 F1000.

Y-.5201 Z.0452 A-175.027 C-16.706 F1000.

Y-.5081 Z.0432 A-175.142 C-11.322 F1000.

Y-.5007 Z.0419 A-175.213 C-5.721 F1000.

Y-.4983 Z.0415 A-175.236 C-.015 F1000.

Y-.5007 Z.0419 A-175.213 C5.696 F1000.

Y-.508 Z.0432 A-175.143 C11.291 F1000.

Y-.52 Z.0452 A-175.028 C16.681 F1000.

Y-.5363 Z.0481 A-174.872 C21.789 F1000.

Y-.5565 Z.0518 A-174.678 C26.551 F1000.

Y-.5803 Z.0564 A-174.45 C30.947 F1000.

Y-.6071 Z.0617 A-174.193 C34.981 F1000.

Y-.6366 Z.0679 A-173.909 C38.649 F1000.

Y-.6684 Z.0749 A-173.604 C41.976 F1000.

Y-.7021 Z.0827 A-173.28 C44.989 F1000.

Y-.6685 Z.075 A-173.603 C48.011 F1000.

Y-.6367 Z.0679 A-173.908 C51.339 F1000.

Y-.6072 Z.0618 A-174.192 C55.008 F1000.

Y-.5803 Z.0564 A-174.449 C59.04 F1000.

Y-.5566 Z.0519 A-174.677 C63.437 F1000.

Y-.5364 Z.0481 A-174.871 C68.196 F1000.

Y-.5201 Z.0452 A-175.027 C73.294 F1000.

Y-.5081 Z.0432 A-175.142 C78.678 F1000.

Y-.5007 Z.0419 A-175.213 C84.279 F1000.

Y-.4983 Z.0415 A-175.236 C89.985 F1000.

Y-.5007 Z.0419 A-175.213 C95.696 F1000.

Y-.508 Z.0432 A-175.143 C101.291 F1000.

Y-.52 Z.0452 A-175.028 C106.681 F1000.

Y-.5363 Z.0481 A-174.872 C111.789 F1000.

Y-.5565 Z.0518 A-174.678 C116.551 F1000.

Y-.5803 Z.0564 A-174.45 C120.947 F1000.

Y-.6071 Z.0617 A-174.193 C124.981 F1000.

Y-.6366 Z.0679 A-173.909 C128.649 F1000.

Y-.6684 Z.0749 A-173.604 C131.976 F1000.

Y-.7021 Z.0827 A-173.28 C134.989 F1000.

Y-.6685 Z.075 A-173.603 C138.011 F1000.

Y-.6367 Z.0679 A-173.908 C141.339 F1000.

Y-.6072 Z.0618 A-174.192 C145.008 F1000.

Y-.5803 Z.0564 A-174.449 C149.04 F1000.

Y-.5566 Z.0519 A-174.677 C153.437 F1000.

Y-.5364 Z.0481 A-174.871 C158.196 F1000.

Y-.5201 Z.0452 A-175.027 C163.294 F1000.

Y-.5081 Z.0432 A-175.142 C168.678 F1000.

Y-.5007 Z.0419 A-175.213 C174.279 F1000.

Y-.4983 Z.0415 A-175.236 C179.985 F1000.

Y-.5007 Z.0419 A-175.213 C185.696 F1000.

Y-.508 Z.0432 A-175.143 C191.291 F1000.

Y-.52 Z.0452 A-175.028 C196.681 F1000.

Y-.5363 Z.0481 A-174.872 C201.789 F1000.

Y-.5565 Z.0518 A-174.678 C206.551 F1000.

Y-.5803 Z.0564 A-174.45 C210.947 F1000.

Y-.6071 Z.0617 A-174.193 C214.981 F1000.

Y-.6366 Z.0679 A-173.909 C218.649 F1000.

Y-.6684 Z.0749 A-173.604 C221.976 F1000.

Y-.7021 Z.0827 A-173.28 C224.989 F1000.

Y-.6685 Z.075 A-173.603 C228.011 F1000.

Y-.6367 Z.0679 A-173.908 C231.339 F1000.

Y-.6072 Z.0618 A-174.192 C235.008 F1000.

Y-.5803 Z.0564 A-174.449 C239.04 F1000.

Y-.5566 Z.0519 A-174.677 C243.437 F1000.

Y-.5364 Z.0481 A-174.871 C248.196 F1000.

Y-.5201 Z.0452 A-175.027 C253.294 F1000.

Y-.5081 Z.0432 A-175.142 C258.678 F1000.

Y-.5007 Z.0419 A-175.213 C264.279 F1000.

Y-.4983 Z.0415 A-175.236 C269.985 F1000.

Y-.5007 Z.0419 A-175.213 C275.696 F1000.

Y-.508 Z.0432 A-175.143 C281.291 F1000.

Y-.52 Z.0452 A-175.028 C286.681 F1000.

Y-.5363 Z.0481 A-174.872 C291.789 F1000.

Y-.5565 Z.0518 A-174.678 C296.551 F1000.

Y-.5803 Z.0564 A-174.45 C300.947 F1000.

Y-.6071 Z.0617 A-174.193 C304.981 F1000.

Y-.6366 Z.0679 A-173.909 C308.649 F1000.

Y-.6684 Z.0749 A-173.604 C311.976 F1000.

Y-.7021 Z.0827 A-173.28 C314.989 F1000.

[André Lapointe@In-House Soluti]

Unless I'm mistaken, I heard that the latest software version of the Matrix control could manage the inverse time feedrate the same way the Heidenhain TNC530 control does.

There may be a parameter that has changed into your control during the update?

 

Correct me if I'm wrong.

[Jeremy Herron@DBS Solutions™]

Robert, could you change your feedrate to 10 ipm amd repost Please.

 

thanks in advance.

 

Andre, there very well be a parameter that needs setting. I am just trying to make sure my post is outputting correctly. Otherwise, Mazak eill just tell me it is a post problem.

[Robert Gleim_Boeing Co.]

G93 Y-.6685 Z.075 A-173.603 C-41.989 F286.32

Y-.6367 Z.0679 A-173.908 C-38.661 F303.83

Y-.6072 Z.0618 A-174.192 C-34.992 F327.89

Y-.5803 Z.0564 A-174.449 C-30.96 F360.02

Y-.5566 Z.0519 A-174.677 C-26.563 F407.43

Y-.5364 Z.0481 A-174.871 C-21.804 F475.49

Y-.5201 Z.0452 A-175.027 C-16.706 F584.32

Y-.5081 Z.0432 A-175.142 C-11.322 F776.79

Y-.5007 Z.0419 A-175.213 C-5.721 F1000.

Y-.4983 Z.0415 A-175.236 C-.015 F1000.

Y-.5007 Z.0419 A-175.213 C5.696 F1000.

Y-.508 Z.0432 A-175.143 C11.291 F1000.

Y-.52 Z.0452 A-175.028 C16.681 F773.13

Y-.5363 Z.0481 A-174.872 C21.789 F582.25

Y-.5565 Z.0518 A-174.678 C26.551 F474.05

Y-.5803 Z.0564 A-174.45 C30.947 F405.49

Y-.6071 Z.0617 A-174.193 C34.981 F360.06

Y-.6366 Z.0679 A-173.909 C38.649 F327.14

Y-.6684 Z.0749 A-173.604 C41.976 F303.55

Y-.7021 Z.0827 A-173.28 C44.989 F285.75

Y-.6685 Z.075 A-173.603 C48.011 F287.47

Y-.6367 Z.0679 A-173.908 C51.339 F304.19

Y-.6072 Z.0618 A-174.192 C55.008 F328.44

Y-.5803 Z.0564 A-174.449 C59.04 F360.77

Y-.5566 Z.0519 A-174.677 C63.437 F408.44

Y-.5364 Z.0481 A-174.871 C68.196 F476.79

Y-.5201 Z.0452 A-175.027 C73.294 F586.02

Y-.5081 Z.0432 A-175.142 C78.678 F779.05

Y-.5007 Z.0419 A-175.213 C84.279 F1000.

Y-.4983 Z.0415 A-175.236 C89.985 F1000.

Y-.5007 Z.0419 A-175.213 C95.696 F1000.

Y-.508 Z.0432 A-175.143 C101.291 F1000.

Y-.52 Z.0452 A-175.028 C106.681 F775.24

Y-.5363 Z.0481 A-174.872 C111.789 F583.8

Y-.5565 Z.0518 A-174.678 C116.551 F475.2

Y-.5803 Z.0564 A-174.45 C120.947 F406.34

Y-.6071 Z.0617 A-174.193 C124.981 F360.67

Y-.6366 Z.0679 A-173.909 C128.649 F327.52

Y-.6684 Z.0749 A-173.604 C131.976 F303.74

Y-.7021 Z.0827 A-173.28 C134.989 F285.76

Y-.6685 Z.075 A-173.603 C138.011 F287.29

Y-.6367 Z.0679 A-173.908 C141.339 F303.83

Y-.6072 Z.0618 A-174.192 C145.008 F327.89

Y-.5803 Z.0564 A-174.449 C149.04 F360.02

Y-.5566 Z.0519 A-174.677 C153.437 F407.43

Y-.5364 Z.0481 A-174.871 C158.196 F475.49

Y-.5201 Z.0452 A-175.027 C163.294 F584.32

Y-.5081 Z.0432 A-175.142 C168.678 F776.79

Y-.5007 Z.0419 A-175.213 C174.279 F1000.

Y-.4983 Z.0415 A-175.236 C179.985 F1000.

Y-.5007 Z.0419 A-175.213 C185.696 F1000.

Y-.508 Z.0432 A-175.143 C191.291 F1000.

Y-.52 Z.0452 A-175.028 C196.681 F773.13

Y-.5363 Z.0481 A-174.872 C201.789 F582.25

Y-.5565 Z.0518 A-174.678 C206.551 F474.05

Y-.5803 Z.0564 A-174.45 C210.947 F405.49

Y-.6071 Z.0617 A-174.193 C214.981 F360.06

Y-.6366 Z.0679 A-173.909 C218.649 F327.14

Y-.6684 Z.0749 A-173.604 C221.976 F303.55

Y-.7021 Z.0827 A-173.28 C224.989 F285.75

Y-.6685 Z.075 A-173.603 C228.011 F287.47

Y-.6367 Z.0679 A-173.908 C231.339 F304.19

Y-.6072 Z.0618 A-174.192 C235.008 F328.44

Y-.5803 Z.0564 A-174.449 C239.04 F360.77

Y-.5566 Z.0519 A-174.677 C243.437 F408.44

Y-.5364 Z.0481 A-174.871 C248.196 F476.79

Y-.5201 Z.0452 A-175.027 C253.294 F586.02

Y-.5081 Z.0432 A-175.142 C258.678 F779.05

Y-.5007 Z.0419 A-175.213 C264.279 F1000.

Y-.4983 Z.0415 A-175.236 C269.985 F1000.

Y-.5007 Z.0419 A-175.213 C275.696 F1000.

Y-.508 Z.0432 A-175.143 C281.291 F1000.

Y-.52 Z.0452 A-175.028 C286.681 F775.24

Y-.5363 Z.0481 A-174.872 C291.789 F583.8

Y-.5565 Z.0518 A-174.678 C296.551 F475.2

Y-.5803 Z.0564 A-174.45 C300.947 F406.34

Y-.6071 Z.0617 A-174.193 C304.981 F360.67

Y-.6366 Z.0679 A-173.909 C308.649 F327.52

Y-.6684 Z.0749 A-173.604 C311.976 F303.74

Y-.7021 Z.0827 A-173.28 C314.989 F285.76

[Tinhman]

This is mine.

Machine Variaxis 730 and using IHS post.

 

G93 X0. Y.6795 Z.0775 A-6.503 C-43.023 F637.96

X0. Y.6577 Z.0725 A-6.293 C-40.912 F662.56

X0. Y.6367 Z.0679 A-6.091 C-38.659 F690.06

X0. Y.6167 Z.0637 A-5.9 C-36.25 F726.86

X0. Y.5979 Z.0599 A-5.719 C-33.686 F772.43

X0. Y.5803 Z.0564 A-5.551 C-30.96 F825.73

X0. Y.5566 Z.0519 A-5.323 C-26.561 F611.16

X0. Y.5364 Z.0481 A-5.129 C-21.8 F712.83

X0. Y.5201 Z.0452 A-4.972 C-16.698 F875.55

X0. Y.5081 Z.0432 A-4.858 C-11.312 F1163.52

X0. Y.5027 Z.0423 A-4.806 C-7.596 F2424.61

X0. Y.4994 Z.0417 A-4.774 C-3.814 F3433.92

X0. Y.4983 Z.0415 A-4.764 C0. F5013.52

X0. Y.4994 Z.0417 A-4.774 C3.814 F5025.79

X0. Y.5027 Z.0423 A-4.806 C7.595 F3464.64

X0. Y.5081 Z.0432 A-4.858 C11.311 F2443.4

X0. Y.5156 Z.0445 A-4.929 C14.932 F1852.08

X0. Y.525 Z.0461 A-5.02 C18.437 F1498.63

X0. Y.5364 Z.0481 A-5.129 C21.805 F1256.96

X0. Y.5495 Z.0505 A-5.254 C25.02 F1100.3

X0. Y.5642 Z.0533 A-5.395 C28.076 F982.78

X0. Y.5804 Z.0564 A-5.551 C30.97 F893.31

X0. Y.6072 Z.0618 A-5.808 C34.994 F539.77

X0. Y.6367 Z.068 A-6.092 C38.662 F490.75

X0. Y.6685 Z.0749 A-6.397 C41.986 F455.21

X0. Y.7022 Z.0828 A-6.721 C45. F428.12

X0. Y.6795 Z.0775 A-6.503 C46.977 F638.23

X0. Y.6577 Z.0725 A-6.293 C49.088 F663.1

X0. Y.6367 Z.0679 A-6.091 C51.341 F690.87

X0. Y.6167 Z.0637 A-5.9 C53.75 F727.96

X0. Y.5979 Z.0599 A-5.719 C56.314 F773.85

X0. Y.5803 Z.0564 A-5.551 C59.04 F827.47

X0. Y.5566 Z.0519 A-5.323 C63.439 F612.67

X0. Y.5364 Z.0481 A-5.129 C68.2 F714.78

X0. Y.5201 Z.0452 A-4.972 C73.302 F878.09

X0. Y.5081 Z.0432 A-4.858 C78.688 F1166.91

X0. Y.5027 Z.0423 A-4.806 C82.404 F2431.03

X0. Y.4994 Z.0417 A-4.774 C86.186 F3440.69

X0. Y.4983 Z.0415 A-4.764 C90. F51.3

X0. Y.4994 Z.0417 A-4.774 C93.814 F5028.17

X0. Y.5027 Z.0423 A-4.806 C97.595 F3471.5

X0. Y.5081 Z.0432 A-4.858 C101.311 F2449.82

X0. Y.5156 Z.0445 A-4.929 C104.932 F1857.24

X0. Y.525 Z.0461 A-5.02 C108.437 F1502.82

X0. Y.5364 Z.0481 A-5.129 C111.805 F1260.31

X0. Y.5495 Z.0505 A-5.254 C115.02 F1103.08

X0. Y.5642 Z.0533 A-5.395 C118.076 F985.08

X0. Y.5804 Z.0564 A-5.551 C120.97 F895.18

X0. Y.6072 Z.0618 A-5.808 C124.994 F540.67

X0. Y.6367 Z.068 A-6.092 C128.662 F491.33

X0. Y.6685 Z.0749 A-6.397 C131.986 F455.49

X0. Y.7022 Z.0828 A-6.721 C135. F428.12

X0. Y.6795 Z.0775 A-6.503 C136.977 F637.96

X0. Y.6577 Z.0725 A-6.293 C139.088 F662.56

X0. Y.6367 Z.0679 A-6.091 C141.341 F690.06

X0. Y.6167 Z.0637 A-5.9 C143.75 F726.86

X0. Y.5979 Z.0599 A-5.719 C146.314 F772.43

X0. Y.5803 Z.0564 A-5.551 C149.04 F825.73

X0. Y.5566 Z.0519 A-5.323 C153.439 F611.16

X0. Y.5364 Z.0481 A-5.129 C158.2 F712.83

X0. Y.5201 Z.0452 A-4.972 C163.302 F875.55

X0. Y.5081 Z.0432 A-4.858 C168.688 F1163.52

X0. Y.5027 Z.0423 A-4.806 C172.404 F2424.61

X0. Y.4994 Z.0417 A-4.774 C176.186 F3433.92

X0. Y.4983 Z.0415 A-4.764 C180. F5013.52

X0. Y.4994 Z.0417 A-4.774 C183.814 F5025.79

X0. Y.5027 Z.0423 A-4.806 C187.595 F3464.64

X0. Y.5081 Z.0432 A-4.858 C191.311 F2443.4

X0. Y.5156 Z.0445 A-4.929 C194.932 F1852.08

X0. Y.525 Z.0461 A-5.02 C198.437 F1498.63

X0. Y.5364 Z.0481 A-5.129 C201.805 F1256.96

X0. Y.5495 Z.0505 A-5.254 C205.02 F1100.3

X0. Y.5642 Z.0533 A-5.395 C208.076 F982.78

X0. Y.5804 Z.0564 A-5.551 C210.97 F893.31

X0. Y.6072 Z.0618 A-5.808 C214.994 F539.77

X0. Y.6367 Z.068 A-6.092 C218.662 F490.75

X0. Y.6685 Z.0749 A-6.397 C221.986 F455.21

X0. Y.7022 Z.0828 A-6.721 C225. F428.12

X0. Y.6795 Z.0775 A-6.503 C226.977 F638.23

X0. Y.6577 Z.0725 A-6.293 C229.088 F663.1

X0. Y.6367 Z.0679 A-6.091 C231.341 F690.87

X0. Y.6167 Z.0637 A-5.9 C233.75 F727.96

X0. Y.5979 Z.0599 A-5.719 C236.314 F773.85

X0. Y.5803 Z.0564 A-5.551 C239.04 F827.47

X0. Y.5566 Z.0519 A-5.323 C243.439 F612.67

X0. Y.5364 Z.0481 A-5.129 C248.2 F714.78

X0. Y.5201 Z.0452 A-4.972 C253.302 F878.09

X0. Y.5081 Z.0432 A-4.858 C258.688 F1166.91

X0. Y.5027 Z.0423 A-4.806 C262.404 F2431.03

X0. Y.4994 Z.0417 A-4.774 C266.186 F3440.69

X0. Y.4983 Z.0415 A-4.764 C270. F51.3

X0. Y.4994 Z.0417 A-4.774 C273.814 F5028.17

X0. Y.5027 Z.0423 A-4.806 C277.595 F3471.5

X0. Y.5081 Z.0432 A-4.858 C281.311 F2449.82

X0. Y.5156 Z.0445 A-4.929 C284.932 F1857.24

X0. Y.525 Z.0461 A-5.02 C288.437 F1502.82

X0. Y.5364 Z.0481 A-5.129 C291.805 F1260.31

X0. Y.5495 Z.0505 A-5.254 C295.02 F1103.08

X0. Y.5642 Z.0533 A-5.395 C298.076 F985.08

X0. Y.5804 Z.0564 A-5.551 C300.97 F895.18

X0. Y.6072 Z.0618 A-5.808 C304.994 F540.67

X0. Y.6367 Z.068 A-6.092 C308.662 F491.33

X0. Y.6685 Z.0749 A-6.397 C311.986 F455.49

X0. Y.7022 Z.0828 A-6.721 C315. F428.12

G00 Z.1828

 

HTH

[robk]

I would run a test for you as well, but I only have NX and no mastercam. Sorry.

[Jeremy Herron@DBS Solutions™]

Thanks for the input all. I am perplexed. I am not sure why we are all getting different f-values. I am going to run your code through my machines and time them and see what results I get. I too have the inhouse post. I will post results.

[Pat-TGM]

My Variaxis 630 and using IHS post

 

I am not sure why we have different FEED RATE out-put ?

 

 

N10 ( 1/4 BALL ENDMILL)

N20 S2500 F10.

N30 M43

N40 M46

N50 G0 G90 A-6.721 C-45.

N60 X0. Y.7022

N70 G43 Z4.0828

N80 M3

N90 Z.1828

N100 G1 Z.0828 A-6.721 C-45.

N110 G93 Y.6685 Z.075 A-6.397 C-41.989 F201.61

N120 Y.6523 Z.0713 A-6.242 C-40.366 F400.58

N130 Y.6367 Z.0679 A-6.092 C-38.661 F401.49

N140 Y.6216 Z.0648 A-5.947 C-36.87 F401.28

N150 Y.6072 Z.0618 A-5.808 C-34.992 F401.82

N160 Y.5934 Z.059 A-5.676 C-33.021 F401.36

N170 Y.5803 Z.0564 A-5.551 C-30.96 F401.97

N180 Y.5566 Z.0519 A-5.323 C-26.563 F202.93

N190 Y.5364 Z.0481 A-5.129 C-21.804 F202.95

N200 Y.5201 Z.0452 A-4.973 C-16.706 F202.68

N210 Y.5081 Z.0432 A-4.858 C-11.322 F202.23

N220 Y.5038 Z.0425 A-4.817 C-8.542 F401.35

N230 Y.5007 Z.0419 A-4.787 C-5.721 F401.01

N240 Y.4983 Z.0415 A-4.764 C-.015 F200.6

N250 Y.4989 Z.0416 A-4.77 C2.847 F399.73

N260 Y.5007 Z.0419 A-4.787 C5.696 F399.1

N270 Y.508 Z.0432 A-4.857 C11.291 F198.62

N280 Y.52 Z.0452 A-4.972 C16.681 F197.63

N290 Y.5276 Z.0466 A-5.045 C19.274 F396.69

N300 Y.5363 Z.0481 A-5.128 C21.789 F396.11

N310 Y.5565 Z.0518 A-5.322 C26.551 F196.69

N320 Y.5803 Z.0564 A-5.55 C30.947 F196.43

N330 Y.5933 Z.059 A-5.675 C33.009 F395.74

N340 Y.6071 Z.0617 A-5.807 C34.981 F394.92

N350 Y.6215 Z.0647 A-5.946 C36.858 F395.41

N360 Y.6366 Z.0679 A-6.091 C38.649 F394.7

N370 Y.6684 Z.0749 A-6.396 C41.976 F196.21

N380 Y.7021 Z.0827 A-6.72 C44.989 F196.28

N390 Y.6685 Z.075 A-6.397 C48.011 F201.58

N400 Y.6523 Z.0713 A-6.242 C49.634 F400.58

N410 Y.6367 Z.0679 A-6.092 C51.339 F401.49

N420 Y.6216 Z.0648 A-5.947 C53.13 F401.28

N430 Y.6072 Z.0618 A-5.808 C55.008 F401.82

N440 Y.5934 Z.059 A-5.676 C56.979 F401.36

N450 Y.5803 Z.0564 A-5.551 C59.04 F401.97

N460 Y.5566 Z.0519 A-5.323 C63.437 F202.93

N470 Y.5364 Z.0481 A-5.129 C68.196 F202.95

N480 Y.5201 Z.0452 A-4.973 C73.294 F202.68

N490 Y.5081 Z.0432 A-4.858 C78.678 F202.23

N500 Y.5038 Z.0425 A-4.817 C81.458 F401.35

N510 Y.5007 Z.0419 A-4.787 C84.279 F401.01

N520 Y.4983 Z.0415 A-4.764 C89.985 F200.6

N530 Y.4989 Z.0416 A-4.77 C92.847 F399.73

N540 Y.5007 Z.0419 A-4.787 C95.696 F399.1

N550 Y.508 Z.0432 A-4.857 C101.291 F198.62

N560 Y.52 Z.0452 A-4.972 C106.681 F197.63

N570 Y.5276 Z.0466 A-5.045 C109.274 F396.69

N580 Y.5363 Z.0481 A-5.128 C111.789 F396.11

N590 Y.5565 Z.0518 A-5.322 C116.551 F196.69

N600 Y.5803 Z.0564 A-5.55 C120.947 F196.43

N610 Y.5933 Z.059 A-5.675 C123.009 F395.74

N620 Y.6071 Z.0617 A-5.807 C124.981 F394.92

N630 Y.6215 Z.0647 A-5.946 C126.858 F395.41

N640 Y.6366 Z.0679 A-6.091 C128.649 F394.7

N650 Y.6684 Z.0749 A-6.396 C131.976 F196.21

N660 Y.7021 Z.0827 A-6.72 C134.989 F196.28

N670 Y.6685 Z.075 A-6.397 C138.011 F201.58

N680 Y.6523 Z.0713 A-6.242 C139.634 F400.58

N690 Y.6367 Z.0679 A-6.092 C141.339 F401.49

N700 Y.6216 Z.0648 A-5.947 C143.13 F401.28

N710 Y.6072 Z.0618 A-5.808 C145.008 F401.82

N720 Y.5934 Z.059 A-5.676 C146.979 F401.36

N730 Y.5803 Z.0564 A-5.551 C149.04 F401.97

N740 Y.5566 Z.0519 A-5.323 C153.437 F202.93

N750 Y.5364 Z.0481 A-5.129 C158.196 F202.95

N760 Y.5201 Z.0452 A-4.973 C163.294 F202.68

N770 Y.5081 Z.0432 A-4.858 C168.678 F202.23

N780 Y.5038 Z.0425 A-4.817 C171.458 F401.35

N790 Y.5007 Z.0419 A-4.787 C174.279 F401.01

N800 Y.4983 Z.0415 A-4.764 C179.985 F200.6

N810 Y.4989 Z.0416 A-4.77 C182.847 F399.73

N820 Y.5007 Z.0419 A-4.787 C185.696 F399.1

N830 Y.508 Z.0432 A-4.857 C191.291 F198.62

N840 Y.52 Z.0452 A-4.972 C196.681 F197.63

N850 Y.5276 Z.0466 A-5.045 C199.274 F396.69

N860 Y.5363 Z.0481 A-5.128 C201.789 F396.11

N870 Y.5565 Z.0518 A-5.322 C206.551 F196.69

N880 Y.5803 Z.0564 A-5.55 C210.947 F196.43

N890 Y.5933 Z.059 A-5.675 C213.009 F395.74

N900 Y.6071 Z.0617 A-5.807 C214.981 F394.92

N910 Y.6215 Z.0647 A-5.946 C216.858 F395.41

N920 Y.6366 Z.0679 A-6.091 C218.649 F394.7

N930 Y.6684 Z.0749 A-6.396 C221.976 F196.21

N940 Y.7021 Z.0827 A-6.72 C224.989 F196.28

N950 Y.6685 Z.075 A-6.397 C228.011 F201.58

N960 Y.6523 Z.0713 A-6.242 C229.634 F400.58

N970 Y.6367 Z.0679 A-6.092 C231.339 F401.49

N980 Y.6216 Z.0648 A-5.947 C233.13 F401.28

N990 Y.6072 Z.0618 A-5.808 C235.008 F401.82

N1000 Y.5934 Z.059 A-5.676 C236.979 F401.36

N1010 Y.5803 Z.0564 A-5.551 C239.04 F401.97

N1020 Y.5566 Z.0519 A-5.323 C243.437 F202.93

N1030 Y.5364 Z.0481 A-5.129 C248.196 F202.95

N1040 Y.5201 Z.0452 A-4.973 C253.294 F202.68

N1050 Y.5081 Z.0432 A-4.858 C258.678 F202.23

N1060 Y.5038 Z.0425 A-4.817 C261.458 F401.35

N1070 Y.5007 Z.0419 A-4.787 C264.279 F401.01

N1080 Y.4983 Z.0415 A-4.764 C269.985 F200.6

N1090 Y.4989 Z.0416 A-4.77 C272.847 F399.73

N1100 Y.5007 Z.0419 A-4.787 C275.696 F399.1

N1110 Y.508 Z.0432 A-4.857 C281.291 F198.62

N1120 Y.52 Z.0452 A-4.972 C286.681 F197.63

N1130 Y.5276 Z.0466 A-5.045 C289.274 F396.69

N1140 Y.5363 Z.0481 A-5.128 C291.789 F396.11

N1150 Y.5565 Z.0518 A-5.322 C296.551 F196.69

N1160 Y.5803 Z.0564 A-5.55 C300.947 F196.43

N1170 Y.5933 Z.059 A-5.675 C303.009 F395.74

N1180 Y.6071 Z.0617 A-5.807 C304.981 F394.92

N1190 Y.6215 Z.0647 A-5.946 C306.858 F395.41

N1200 Y.6366 Z.0679 A-6.091 C308.649 F394.7

N1210 Y.6684 Z.0749 A-6.396 C311.976 F196.21

N1220 Y.7021 Z.0827 A-6.72 C314.989 F196.28

N1230 G0 Z.1827

N1240 Z4.0827

[gcode]

I'm moving this to the post fourm, maybe some of the post wizards will chime in

 

a couple of things to check

 

Look in your X5 Machine Def on the "Op, Feed Rates, axis motion page

I think you have Min Inverse time set to 1000. It looks like it should be set to a larger number for this machine

probably 10000.

 

There is also a varible in the post

inv_sec : 0 #Inverse feedrate is in seconds

 

if you change the 0 to a 1 it ouptuts in minutes instead os seconds

all the machines I've ever worked with use seconds

 

this is from a mpgen 5X post.. this variable is buring in the bin in my In House posts

so I can't see it or check it. It's not likely that its set wrong but you may want to call and ask if you can't find it.