Getting a 30 day trial of X5

[Bruce Caulley]

Ahoy!

The company I am at is looking to upgrade the limited offline options they have now to a full seat or two of CAM software. I no longer programme and have been out of the saddle for a while, but have arranged a 30 day trial. I'll be doing the demo to the company myself as the VAR here is 1000 miles away and he trusts me to handle it on my own :eek:

 

I was never really into the lathe side of things, mainly milling up to full 5 axis. Can anyone help me out with some good examples of jobs for the following machines:

 

Integrex E410

Any Y-axis lathe

Any VTL with or without C-axis milling.

 

Also need to highlight the machsim capability so am hoping the install CD has a range of similar machines.

 

Any and all help appreciated.

 

 

Bruce

[gcode]

Bruce,

I'm going to move this to the main fourm.

Might get more action there.

[Greg Williams]

I will send ya a few

[Bruce Caulley]

Thanks Greg.

[Joe788]

I don't wanna be the party pooper, but damn:

 

Integrex E410

Any Y-axis lathe

Any VTL with or without C-axis milling

 

Mastercam is probably not gonna be the best solution.

[Bruce Caulley]

No sub spindles or multiple turrets here Joe. Just BIG jobs in small batches, but I get your meaning.

 

Bruce