transform ghosted operations

[CarbonCAD]

I have two lines drawn just for testing. One line gets a contour toolpath. The second line gets a contour toolpath, but it gets ghosted. Now I transform both of them together. The one that was ghosted now posts out. Is this normal? I did not think that would happen.

[CJep]

In your transform op you are selecting a toolpath that has already been set to have the posting turned off?

 

In the transform you are selecting copy source operations & disable posting in selected operations?

[gcode]

yes this is normal..

say you want to rotate a toolpath 20 times..

there are 2 ways you can do it..

ghost the toolpath and rotate 20 times..

or post it and rotate 19 times..

you'll get the same gcode either way.

[CarbonCAD]

"In your transform op you are selecting a toolpath that has already been set to have the posting turned off? " - Yes

 

One toolpath normal

One toolpath ghosted

Both transformed - ghosted one still posts

[CJep]

I'm running McamX5 MU1 and that didn't seem to be the case when I posted the code.