How to install Mpmaster?

[floo]

Hello!

Im new to this forum.

I wonder where to put the mpmaster files after ive downloaded them, shall i put all the 4 files with the rest of the post files or?

[Jasond0530]

Welcome to the forum!

 

you put the control and MMD file into the cnc machine folder which is in the shared folder(C:\Documents and Settings\All Users\Documents\shared mcamx5) and the post file into the post folder, you only need one of the post files depending onwhat machine you are using vertical or Horizontal!

 

Hope that helps!

[Chris In-House Solutions]

Here is a link to a video demonstrating how to install a mpmaster post.

 

My link

 

Same steps except take the mplmaster.pst and put it in the lathe post folder.

[floo]

Welcome to the forum!

 

you put the control and MMD file into the cnc machine folder which is in the shared folder(C:\Documents and Settings\All Users\Documents\shared mcamx5) and the post file into the post folder, you only need one of the post files depending onwhat machine you are using vertical or Horizontal!

 

Hope that helps!

 

Thank you very much!

But how do i edit the post? if i want to change som code around the toolchanges and at the end of the program?

[floo]

Here is a link to a video demonstrating how to install a mpmaster post.

 

My link

 

Same steps except take the mplmaster.pst and put it in the lathe post folder.

Thanks but the video doesnt work for me, dont know whats wrong?

[bigjohn]

Here is a link to a video demonstrating how to install a mpmaster post.

 

My link

 

Same steps except take the mplmaster.pst and put it in the lathe post folder.

 

Wrong link, mate.

[Chris In-House Solutions]

Here is the video.

 

 

As for editing your code.. this video only shows you how to install the post. To edit the code you would either talk with your reseller or ask around here. Post what your getting and what it is you want. I'm sure someone can help you.