need st20y post help

[Jayme]

help its been awhile since i have been here we just got a new machine at work its a haas st20y big bore cy with live tooling

i know there are better machines but we have 3 other haas machines and they have been great no problems in 8 years we needed to step up

to a machine that had a c axis with live tooling.ok heres the problem i am running x6 and the mpmaster machine def and mpmaster

post witch has a few bugs in it i know that i have been editing the finished post but the more i get into the cy live tooling i see

more issues i was wondering if anyone out here knows if there is a updated post for this machine or is the mpmaster the best starting point

and yes i contacted my reseller witch was like pulling teeth he said they are so backed up it would be upto 6 mounths or more for them to

look at it he said he could use a outside source but that would be alot of money please any help would be welcome thanks Jayme

[Chris In-House Solutions]

Hey Jayme,

 

You could ask your reseller to get in contact with In-House Solutions. We most likely already have a post made for your machine and could have it to you by the end of next week.

[Trevor Bailey]

chris.....this is one of the ones i sent in. if you have the poco stuff added, please let me know. once added, the ST-y and DS-y lathes posts will be ready.