Okuma lathe post

[mig]

Hi ,

Anybody can share working Okuma lathe 2 axis post for X6?

Thank you in advance

[Guest]

mig,

 

Are you asking for a post?

 

There is one on the extranet your reseller can grab for you

[Guest Greyman]

Hi ,

Anybody can share working Okuma lathe 2 axis post for X6?

Thank you in advance

Look on the FTP there might be one there, If not I can customize one for you off the MPMaster. We would need to get together and I would need the programming manuals. If you are interested PM me. Thx !

[mig]

Look on the FTP there might be one there, If not I can customize one for you off the MPMaster. We would need to get together and I would need the programming manuals. If you are interested PM me. Thx !

Thank you guys ,

This is my problem , I am not familiar with Okuma lathe format .Just trying to be smart a$$ and learn fastest way.

[Goldorak]

i use the one developed by IHS and it works flawlessly out of the box !

[mig]

i use the one developed by IHS and it works flawlessly out of the box !

Sorry,

what is IHS?

[Goldorak]

In House Solution

 

http://www.inhousesolutions.com/

[mig]

In House Solution

 

http://www.inhousesolutions.com/

Oops … right , stupid me

But they offer Fanuc base MPL master post .

Is it works for Okuma or need to be adopted ?

Usually Okuma format different , not same as Fanuc .

[Goldorak]

no it's the generic Okuma 2axis processor

[gcode]

previous post hidden

 

please read the TOS about asking for a post

 

your dealer is the first place to go for a post